苌姗姗, 胡进波, Bruno C,等. 2011a. 氮气吸附法表征杨木应拉木的孔隙结构. 林业科学,47(10): 134-140.
Chang SS, Hu JB, Bruno C,et al. 2010a. Pore structure characterization of poplar tension wood by nitrogen adsorption-desorption method. Scientia Silvae Sinicae,47(10): 134-140.
苌姗姗, 胡进波, 赵广杰. 2011b. 不同干燥预处理对杨木应拉木孔隙结构的影响. 北京林业大学学报,33(2): 91-95.
Chang S S, Hu J B, Zhao G J. 2010b. Effects of different drying pretreatments on pore structure of poplar tension wood. Journal of Beijing Forestry University,33(2): 91-95.
陈 方. 2003. 用129Xe NMR技术研究多孔性材料. 武汉:中国科学院研究生院博士学位论文.
Chen F. 2003. Investigation of porous materials by 129Xe NMR technique. Wuhan: PhD thesis of Graduate University of Chinese Academy of Sciences.
蒋正武, 邓子龙, 袁政成,等. 2013. 热孔计法表征不同龄期下混凝土孔结构的研究. 建筑材料学报,16(6): 1044-1048.
Jiang Z W, Deng Z L, Yuan Z C, et al. 2013. Study on pore structure characterization of concrete at different ages by thermoporometry. Journal of Building Materials,16(6): 1044-1048.
蒋正武, 邓子龙, 张 楠. 2012a. 热孔计法表征水泥基材料孔结构. 硅酸盐学报,40(8): 1081-1087.
Jiang Z W, Deng Z L, Zhang N. 2012a. Pore structure characterization of cement-based material by theormoporometry. Journal of the Chinese Ceramic Society,40(8): 1081-1087.
蒋正武, 张 楠, 杨正宏. 2012b. 热孔计法表征水泥基材料孔结构的热力学计算模型. 硅酸盐学报,40(2): 194-199.
Jiang Z W, Zhang N, Yang Z H. 2012b. Thermodynamic calculational model for pore structure characterization of cement-based material by thermoporometry. Journal of the Chinese Ceramic Society,40(2): 194-199.
李满祥. 1984. 测定木片纤维多孔性的研究. 广东造纸,(1): 12-18.
Li M X. 1985. A study on the measurement of wood fiber pores. Guangdong Pulp & Paper,(1): 12-18.
刘 勇, 张维萍, 韩秀文,等. 2006. 超极化129Xe核磁共振技术及其在多孔催化材料研究中的应用. 催化学报,27(9): 827-836.
Liu Y, Zhang W P, Han X W, et al. 2006. Hyperpolarized 129Xe NMR and its applications in characterization of porous catalytic materials. Chinese Journal of Catalysis,27(9): 827-836.
罗文圣, 赵广杰. 2001. 木材细胞壁的空隙构造及物质的输运过程. 北京林业大学学报,23(2): 85-89.
Luo W S, Zhao G J. 2001. Pore structure of cell wall of wood and transport processes of substance. Journal of Beijing Forestry University,23(2): 85-89.
粟劲苍, 王先友, 汪形艳,等. 2011. 多维有序多孔炭材料的制备及其在超级电容器中的应用. 第29届全国化学与物理电源学术年会, 湖南长沙.
王小青, 刘君良. 2006. 原子力显微镜在木材科学研究中的应用. 世界林业研究,19(1): 38-41.
Wang X Q, Liu J L. 2006. A review of the application of atomic force microscopy in wood science research. World Forestry Research,19(1): 38-41.
王中平, 黄晨明, 王 弢. 2012. 核磁共振冷冻测孔法测量水泥基材料孔径分布研究. 建筑材料学报,16(1): 6-10.
Wang Z P, Huang C M, Wang T. 2012. Study of pore size distribution measurement of cementitious materials by nuclear magnetic resonance cryoporometry(NMRC). Journal of Building Materials,16(1): 6-10.
王中平, 王 弢. 2013. 简述核磁共振冷冻测孔法的原理及应用. 材料导报,27(1): 129-133.
Wang Z P, Wang T. 2013.A brief introduction to the principle and application of Nuclear Magnetic Resonance Cryoporometry. Materials Review,27(1): 129-133.
赵广杰. 2002. 木材中的纳米尺度、纳米木材及木材-无机纳米复合材料. 北京林业大学学报,24(Z1): 208-211.
Zhao G J. 2002. Nano-dimensions in wood, nano-wood, wood and inorganic nano-composites. Journal of Beijing Forestry University,24(Z1): 208-211.
朱纪磊, 奚正平, 汤慧萍,等. 2006. 多孔结构表征及分形理论研究简况. 稀有金属材料与工程,35(S2): 452-456.
Zhu J L, Xi Z P, Tang H P, et al. 2006. Characterization of pore structure and some applications of fractal theory. Rare Metal Materials and Engineering,35(S2): 452-456.
中戸莞二. 1973. 木材の空隙構造(< 小特集> 木質材料小特集). 材料, 22(241): 903-907.
Akitomo M, Suzuki R, Ishimaru Y, et al. 2006. Micropore structure of wood and bamboo charcoals-establishment of a method for the calculation of effective pore size distribution and the possibility of controlling micropore structure. Mokuzai Gakkaishi, 52(4): 228-234.
Alnaimi S M, Strange J H, Smith E G. 1994. The characterization of porous solids by NMR. Magnetic Resonance Imaging, 12(2): 257-259.
Andérs D, Krause A, Mai C, et al. 2009. Modification of Fagus sylvatica L. with 1,3-dimethylol-4,5-dihydroxy ethylene urea(DMDHEU). Part 2: Pore size distribution determined by differential scanning calorimetry. Holzforschung , 63(1): 89-93.
Bonner L D, Thomas R J. 1972. The Ultrastructure of Intercellular Passageways in vessels of yellow poplar(Liriodendron tulipifera, L.)Part 1: Vessel Pitting. Wood Science and Technology, 6: 196-203.
Borrega M, Karenlampi P P. 2011. Cell wall porosity in norway spruce wood as affected by high-temperature drying. Wood and Fiber Science, 43(2): 206-214.
Butterfield B. 2006. The structure of wood: form and function // Primary Wood Processing. Springer Netherlands, 1-22.
Ding J, Deng C, Yuan W, et al. 2013. Preparation of porous TiC/C ceramics using wooden template in molten salt media. Advances in Applied Ceramics, 112(3): 131-135.
Donaldsonm L A, Wong K K Y, Mackie K L. 1988. Ultrastructure of steam-exploded wood. Wood Science and Technology, 22: 103-114.
Everett D H. 1972. Manual of symbols and terminology for physicochemical quantities and units, appendix II: definitions, terminology and symbols in colloid and surface Chemistry Pure and Applied Chemistry, 31(4): 577-638.
Fengel D. 1970. The Ultrastructure of cellulose from wood—part 2: problems of the isolation of cellulose. Wood Science and Technology, 4: 15-35.
Grigsby W, Kroese H, Dunningham E. 2013. Characterisation of pore size distributions in variously dried Pinus radiata: analysis by thermoporosimetry. Wood Science and Technology, 47(4): 737-747.
Grioui N, Halouani K, Zoulalian A, et al. 2007. Experimental study of thermal effect on olive wood porous structure during carbonization. Maderas-Ciencia Y Tecnologia, 9(1): 15-28.
Hill C A. 2007. Wood modification: chemical, thermal and other processes. John Wiley & Sons.
Jackson C L, McKenna G B. 1990. The melting behavior of organic materials confined in porous solids. Journal of Chemical Physics, 93(12): 9002-9011.
Jesper F, Salmen L. 2005. Ultrastructural changes in a holocellulose pulp revealed by enzymes, thermoporosimetry and atomic force microscopy. Holzforschung, 59(6): 589-597.
Kalliat M, Kwak C Y, Schmidt P W. 1983. Small angle X-ray scattering measurement of porosity in wood following pyrolysis. Wood Science and Technology, 17: 241-257.
Mitchell J, Webber J B W, Strange J H. 2008. Nuclear magnetic resonance cryoporometry. Physics Reports, 461(1): 1-36.
Moura M, Ferreira P, Figueiredo M. 2005. Mercury intrusion porosimetry in pulp and paper technology. Powder Technology, 160(2): 61-66.
Nakamura K, Hatakeyama T, Hatakeyama H. 1981. Studies on bound water of cellulose by differential scanning calorimetry. Textile Research Journal, 51(9): 607-613.
Notley S M, Wgberg L. 2005. Morphology of modified regenerated model cellulose II surfaces studied by atomic force microscopy: effect of carboxymethylation and heat treatment. Biomacromolecules, 6(3): 1586-1591.
stlund , Kohnke T, Nordstierna L, et al. 2010. NMR cryoporometry to study the fiber wall structure and the effect of drying. Cellulose, 17(2): 321-328.
Papadopoulos A N, Hill C A S, Gkaraveli A. 2003. Determination of surface area and pore volume of holocellulose and chemically modified wood flour using the nitrogen adsorption technique. Holz als Roh-und Werkstoff, 61(6): 453-456.
Paris O, Zollfrank C, Zickler G A. 2005. Decomposition and carbonisation of wood biopolymers—a microstructural study of softwood pyrolysis. Carbon, 43(1): 53-66.
Park S, Venditti R A, Jameel H, et al. 2006. Changes in pore size distribution during the drying of cellulose fibers as measured by differential scanning calorimetry. Carbohydrate Polymers, 66(1): 97-103.
Pltze M, Niemz P. 2011. Porosity and pore size distribution of different wood types as determined by mercury intrusion porosimetry. European Journal of Wood and Wood Products, 69(4): 649-657.
Stamm A J. 1967. Movement of fluids in wood—part 1: flow of fluids in wood. Wood Science and Technology, 1: 122-141.
Stamm A J. 1972. Maximum effective vessel diameters of hardwoods. Wood Science and Technology, 6: 263-271.
Stamm A J. 1979. Void structure and permeability of paper relative to that of wood. Wood Science and Technology, 13: 41-47.
Stone J. 1965. A study of cell wall structure by nitrogen adsorption. Pulp and Paper Research Institute of Canada.
Suchy M, Virtanen J, Kontturi E, et al. 2010. Impact of drying on wood ultrastructure observed by deuterium exchange and photoacoustic FT-IR spectroscopy. Biomacromolecules, 11(2): 515-520.
Webber J B W. 2000. Characterising porous media. University of Kent, Ph.D.
Webber J B W. 2003. NMR cryoporometry: Application to wood composite structures. Paper presented at the Magnetic Resonance Imaging of Wood at its Interface with Glue, Coatings and Air, EC Framework 5 Dissemination.
Westermarck S. 2000. Use of mercury porosimetry and nitrogen adsorption in characterisation of the pore structure of mannitol and microcrystalline cellulose powders, granules and tablets. University of Helsinki Helsinki, Finland.
Xu F, Shi Y-C, Wang D. 2013. X-ray scattering studies of lignocellulosic biomass: a review. Carbohydrate Polymers, 94(2): 904-917.
Yamamoto T, Endo A, Inagi Y, et al. 2005. Evaluation of thermoporometry for characterization of mesoporous materials. Journal of Colloid and Interface Science, 284(2): 614-620.
Zauer M, Pfriem A, Wagenführ A. 2013. Toward improved understanding of the cell-wall density and porosity of wood determined by gas pycnometry. Wood Science and Technology, 1-15. |