高 鹏, 陶敏中, 袁哲俊, 等. 1996. 纳米压痕技术及其应用. 中国机械工程, 7(5): 58-59.
(Gao P, Tao M Z, Yuan Z J, et al. 1996. Nanoindentation technology and its application. China Mechanical Engineering, 7(5):58-59.)
何 莉. 2012. 马尾松木材糠醇树脂改性技术及机理研究. 长沙: 中南林业科技大学硕士学位论文.
(He L. 2012. Study the mechanism of fururylated wood and mechanical behavior. Changsha: MS thesis of Central South University of Forestry and Technology.)
黄艳辉, 费本华, 余 雁, 等. 2012. 酚醛树脂改性对管胞细胞壁力学性能的影响. 林业科学, 48(12): 89-92.
(Huang Y H, Fei B H, Yu Y, et al. 2012. Effect of phenol-formaldehyde-modified on mechanical properties of tracheids cell wall. Scientia Silvae Sinicae, 48(12): 89-92.)
江泽慧, 余 雁, 费本华, 等. 2004. 纳米压痕技术测量管胞次生壁S2层的纵向弹性模量和硬度. 林业科学, 40(2): 113-118.
(Jiang Z H, Yu Y, Fei B H, et al. 2004. Using nanoindentation technique to determine the longitudinal elastic modulus and hardness of tracheids secondary wall. Scientia Silvae Sinicae, 40(2): 113-118.)
林兰英, 傅 峰. 2012. 强化复合木材细胞壁的纳米压痕测试分析. 北京林业大学学报, 34(5): 139-143.
(Lin L Y, Fu F. 2012. Nanoindentation test and analysis of cell wall of strengthened composite wood. Journal of Beijing Forestry University, 34(5): 139-143.)
易 楠, 顾轶卓, 李 敏, 等. 2010. 碳纤维复合材料界面结构的形貌与尺寸的表征. 复合材料学报, 27(5): 36-40.
(Yi N, Gu Y Z, Li M, et al. 2010. Characterization on topograghy and dimension of the interphase structure in carbon fiber composites. Acta Materiae Compositae Sinica, 27(5): 36-40.)
余 雁, 费本华, 张 波, 等. 2006. 针叶材管胞细胞壁不同壁层的纵向弹性模量和硬度. 北京林业大学学报, 28(5): 114-118.
(Yu Y, Fei B H, Zhang B, et al. 2006. Longitudinal MOE and hardness of different cell wall layers of softwood tracheids. Journal of Beijing Forestry University, 28(5): 114-118.)
张泰华. 2004. 微/纳米力学测试技术及其应用. 北京: 机械工业出版社, 4-6.
(Zhang T H. 2004. Micro/nano mechanical testing technology and its application. Beijing: China Machine Press, 4-6.)
周兆兵, 徐朝阳, 张 洋, 等. 2010. 响叶杨细胞壁尺寸参数及其纳米压痕特性. 林业科学, 46(11): 138-143.
(Zhou Z B, Xu Z Y, Zhang Y, et al. 2010. Dimension parameters and nanoindentation of Populus adenopoda wood cell. Scientia Silvae Sinicae, 46(11): 138-143.)
朱 杰, 孙润广. 2005. 原子力显微镜的基本原理及其方法学研究. 生命科学仪器, 3(1): 22-26.
(Zhu J, Sun R G. 2005. Introduction to atomic force microscope and its manipulation. Life Science Instruments, 3(1):22-26.)
朱 捷, 张 洋, 周兆兵. 2011. 酶处理对杨木表面性能和胞壁弹性模量的影响. 木材工业, 25(6): 13-16.
(Zhu J, Zhang Y, Zhou Z B. 2011. Influence of enzyme treatment on wetability and modulus of elasticity of poplar. China Wood Industry, 25(6): 13-16.)
Balani K, Agarwal A. 2008. Damping behavior of carbon nanotube reinforced aluminum oxide coatings by nanomechanical dynamic modulus mapping. Journal of Applied Physics, 104(6): 517-523.
Balooch G, Marshall G, Marshall S, et al. 2004. Evaluation of a new modulus mapping technique to investigate microstructural features of human teeth. Journal of Biomechanics, 37(8): 1223-1232.
Ciprari D, Jacob K, Tannenbaum R. 2006. Characterization of polymer nanocomposite interphase and its impact on mechanical properties. Macromolecules, 39(19): 6565-6573.
Frihart C R, Yelle D J, Ralph J, et al. 2008. Enhanced understanding of the relationship between chemical modification and mechanical properties of wood. 9th Pacific Rim Bio-based Composites Symposium. Rotorua, New Zealand.
Ganor Y, Shilo D. 2008. Modulus mapping of nanoscale closure variants in Ni-Mn-Ga. Applied Physics Letters, 93(3): 905-908.
Gillen K T, Terrill E R, Winter R M. 2001. Modulus mapping of rubbers using micro-and nano-indentation techniques. Rubber Chemistry and Technology, 74(3): 428-450.
Gindl W, Gupta H S. 2002. Cell-wall hardness and Young's modulus of melamine-modified spruce wood by nano-indentation. Composites Part A: Applied Science and Manufacturing, 33: 1141-1145.
Gindl W, Gupta H S, Schöberl T, et al. 2004a. Mechanical properties of spruce wood cell walls by nanoindentation. Applied Physics A, 79(8): 2069-2073.
Gindl W, Schöberl T. 2004b. The significance of the elastic modulus of wood cell walls obtained from nanoindentation measurements. Composites Part A: Applied Science and Manufacturing, 35(11): 1345-1349.
Hurley D C. 2009. Contact resonance force microscopy techniques for nanomechanical measurements// Bhushan B, Fuchs H. In Applied Scanning Probe Methods XI: Scanning Probe Microscopy Techniques, Berlin Heidelberg: Springer, 97-138.
Jiang Z, Yu Y, Qin D, et al. 2006. Pilot investigation of the mechanical properties of wood flooring paint films by in situ imaging nanoindentation. Holzforschung, 60: 698-701.
Konnerth J, Gierlinger N, Keckes J, et al. 2009. Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle. Journal of Materials Science, 44(16): 4399-4406.
Konnerth J, Gindl W. 2006. Mechanical characterisation of wood-adhesive interphase cell walls by nanoindentation. Holzforschung, 60(4): 429-433.
Konnerth J, Valla A, Gindl W. 2007. Nanoindentation mapping of a wood-adhesive bond. Applied Physics A: Materials Science & Processing, 88(2): 371-375.
Kos A B, Hurley D C. 2008. Nanomechanical mapping with resonance tracking scanned probe microscope. Measurement Science & Technology, 19(1): 1-9.
Lee S H, Wang S Q, Endo T, et al. 2009. Visualization of interfacial zones in lyocell fiber-reinforced polypropylene composite by AFM contrast imaging based on phase and thermal conductivity measurements. Holzforschung, 63(2): 240-247.
Lee S H, Wang S Q, Pharr G M, et al. 2007. Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis. Composites Part A: Applied Science and Manufacturing, 38(6): 1517-1524.
Liang K, Du G B, Hosseinaei O, et al. 2011. Mechanical properties of secondary wall and compound corner middle lamella near the phenol-formaldehyde (PF) adhesive bond line measured by nanoindentation. Advanced Materials Research, 236-238: 1746-1751.
Nair S S, Wang S, Hurley D C. 2010. Nanoscale characterization of natural fibers and their composites using contact-resonance force microscopy. Composites Part A, 41: 624-631.
Nizam B R H, Lim C T. 2006. Nanoindentation of teeth-a review. Journal of Experimental Mechanics, 21(1): 35-50.
Obersriebnig M, Konnerth J, Gindl W. 2013. Evaluating fundamental position-dependent differences in wood cell wall adhesion using nanoindentation. International Journal of Adhesion and Adhesives, 40: 129-134.
Obersriebnig M, Veigel S, Gindl W, et al. 2012. Determination of adhesive energy at the wood cell-wall/UF interface by nanoindentation (NI). Holzforschung, 66: 781-787.
Paris O, Zollfrank C, Zickler G A. 2005. Decomposition and carbonisation of wood biopolymers—a microstructural study of softwood pyrolysis. Elsevier, 43(1): 53-66.
Pethica J B, Oliver W C. 1989. Mechanical properties of nanometer volumes of material:use of the elastic response of small area indentation. Materials Research Society, 130: 13-23.
Tze W T Y, Wang S, Rials T G, et al. 2007. Nanoindentation of wood cell walls: continuous stiffness and hardness measurements. Composites Part A: Applied Science and Manufacturing, 38(3): 945-953.
Uskokovic P, Tang C, Tsui C, et al. 2007. Micromechanical properties of a hydroxyapatite/poly-L-lactide biocomposite using nanoindentation and modulus mapping. Journal of the European Ceramic Society, 27(2): 1559-1564.
Wimmer R, Lucas B N, Tsui T Y, et al. 1997. Longitudinal hardness and Young's modulus of spruce tracheid secondary walls using nanoindentation technique. Wood Science and Technology, 31(2): 131-141.
Wu Y, Wang S, Zhou D, et al. 2009. Use of nanoindentation and silviscan to determine the mechanical properties of 10 hardwood species. Wood and Fiber Science, 41(1): 64-73.
Yin Y, Berglund L, Salmen L. 2011. Effect of steam treatment on the properties of wood cell walls. Biomacromolecules, 12(1): 194-202.
Yu Y, Frihart C R, Jakes J E, et al. 2012. Mechanical characterization of wood-adhesive interphase with an improved nanoindentation technique. Proceedings of the 55th International Convention of Society of Wood Science and Technology. Beijing, China, August 27th-31th, 2-8.
Zhang T, Bai S L, Zhang Y F, et al. 2012a. Viscoelastic properties of wood materials characterized by nanoindentation experiments. Wood Science and Technology, 46(5): 1003-1016.
Zhang Y, Meng Y, Wu Y, et al. 2012b. Effect of enzyme treatment on the mechanical properties of wood cell walls by nanoindentation. BioResources, 7(2): 2249-2259.
Zickler G A, Schoberl T, Paris O. 2006. Mechanical properties of pyrolysed wood: a nanoindentation study. Philosophical Magazine, 86(10): 1373-1386. |