陈 平,陈 辉. 2010. 先进聚合物基复合材料界面及纤维表面改性. 北京:科学出版社,17-18. (Chen P,Chen H. 2010. Advanced polymer matrix composites interface and fiber surface modification.Beijing:Science Press, 17-18.[in Chinese]) 杜官本,孙照斌,黄林荣. 2007. 微波等离子体处理对柚木表面润湿性的影响. 东北林业大学学报, 35(12):31-33. (Du G B,Sun Z B, Huang L R. 2007. Effect of microwave plasma oil surface wettability of common teak wood. Journal of Northeast Forestry University, 35(12):31-33.[in Chinese]) 古忠云,马玉珍,李茂果. 1999. 微波在高分子材料表面处理中的应用. 粘接,20(6):25-27. (Gu Z Y, Ma Y Z, Li M G. 1999. Microwave application surface modification of polymer materials. Adhesive, 20(6):25-27.[in Chinese]) 梅长彤,周绪斌,朱坤安,等. 2009. 等离子体处理对稻秸/聚乙烯复合材料界面的改性. 南京林业大学学报:自然科学版,33(6):1-5. (Mei C T, Zhou X B, Zhu K A, et al. 2009. Interfacial modification of rice straw-HDPE composite with plasma treatment. Journal of Nanjing Forestry University:Natural Science Edition, 33(6):1-5.[in Chinese]) 李绅福. 1993. 用微波等离子体改性氟树脂表面. 粘接,14(4):1-4. (Li S F. 1993. Surface modification of fluorinated polymers by microwave plasmas. Adhesive, 14(4):1-4.[in Chinese]) 彭晓瑞,张占宽. 2016. 柔性装饰薄木制备的现状与发展. 木材工业,30(6):23-26. (Peng X R, Zhang Z K. 2016. Present situation and development of Preparation technology of pliable decorative sliced veneer. China Wood Industry, 30(6):23-26.[in Chinese]) 彭晓瑞,张占宽. 2017. 塑膜增强柔性装饰薄木的制备工艺及性能研究. 木材工业,31(1):50-53. (Peng X R, Zhang Z K. 2017. Technology and properties of flexible decorative veneers reinforced with low density polyethylene(LDPE). China Wood Industry, 31(1):50-53.[in Chinese]) 宋华杰,董海山,郝 莹,等. 2000. 计算固体表面能的Young-Good-Girifalco-Fowkes 方程的理论基础. 粘接,21(5):1-5. (Song H F, Dong H S, Hao Y, et al. 2000. Theoretic funcdation of Young-Good-Girifalco-Fowkes equation use for solid surface energy calculation.Adhesive, 21(5):1-5.[in Chinese]) 汤丽娟. 2015. 冷等离子体改性对木质单板表界面作用机理的研究. 南京:南京林业大学博士学位论文,61-78. (Tang L J. 2015. Research on mechanism of veneer surface properties and the interfacial adhesion of plywood be means of cold plasma treatment. Nanjing:phD thesis of Nanjing Forestry University, 61-78.[in Chinese]) 王洪艳,杜官本,韩永国,等. 2013. DBD 冷等离子体处理对云南松表面润湿性的影响. 林业科技开发,27(1):35-37. (Wang H Y, Du G B, Han Y G, et al. 2013. Influence of dielectric barrier discharge (DBD) cold plasma treatment on wettability of Pinus yunnanesis wood. China Forestry Science and Technology, 27(1):35-37.[in Chinese]) 徐信武,周定国. 2009. 等离子体改性稻秸的XPS分析. 南京林业大学学报:自然科学版,33(5):69-72. (Xu X W, Zhou D G. 2009. XPS analysis of rice straw modified with plasma treatment. Journal of Nanjing Forestry University:Natural Science Edition, 33(5):69-72.[in Chinese]) 杨 超,邱 高. 2001. 等离子体表面技术和在有机材料表面改性应用中的新进展. 高分子材料科学工程,17(6):30-34. (Yang C, Qiu G. 2001. Development in low-temperature plasma technique and application to surface modification of organic materials. Polymer Materials Science and Engineering, 17(6):30-34.[in Chinese]) 杨喜昆,杜官本,钱天才,等. 2003. 木材表面改性的XPS分析. 分析测试学报,22(4):5-8. (Yang X K, Du G B, Qian T C, et al. 2003. Analysis of the surface modification of wood by X-ray photoelectron spectroscopy. Journal of Instrumental Analysis, 22(4):5-8.[in Chinese]) 张 俊,杜官本,雷 洪,等. 2012. 空气介质阻挡放电等离子体对云南松单板表面的处理工艺. 西南林业大学学报,32(3):88-91. (Zhang J, Du G B, Lei H, et al. 2012. Treatment technology for veneer surface of Pinus yunnanensis by air dielectric barrier discharge plasma. Journal of Southeast Forestry University, 32(3):88-91.[in Chinese]) 章 蓉,周晓燕,汤丽娟,等. 2013. 常压冷等离子体处理改善杨木单板胶合特性的研究. 南京林业大学学报:自然科学版,37(5):169-171. (Zhang R, Zhou X Y, Tang L J. 2013. Improvement bondability of polar veneers by atmospheric pressure plasma discharge treatment. Journal of Nanjing Forestry University:Natural Science Edition, 37(5):169-171.[in Chinese]) 周晓芸. 2008. 低温等离子体改性后竹材表界面特性的研究. 南京:南京林业大学硕士学位论文,2-11. (Zhou X Y. 2008. Study about the characteristic of bamboo surface and interface by the treatment of low temperature plasma. Nanjing:MS thesis of Nanjing Forestry University,2-11.[in Chinese]) 朱元右. 2003. 等离子体技术在金属材料表面改性中的应用. 机械,30(6):68-72. (Zhu Y Y. 2003. Application of plasma technology to surface modification of metal. Machinery, 30(6):68-72.[in Chinese]) Altgen D, Avramidis G, Viöl W, et al. 2016. The effect of air plasma treatment at atmospheric pressure on thermally modified wood surfaces. Wood Sci and Tech, 50(6):1227-1241. Avramidis G, Hauswald E, Lyapin A, et al. 2009. Plasma treatment of wood and wood-based materials to generate hydrophilic or hydrophobic surface characteristics. Wood Material Science & Engineering, 4(1/2):52-60. Chen P,Wang J,Zhang C S,et al. 2008. Influence of oxygen plasma treatment on surface properties of armos fiber. Surface Engineering,373-374:430-433. Chen W M, Zhou X Y, Zhang X T, et al. 2017. Fast enhancement on hydrophobicity of poplar wood surface using low-pressure dielectric barrier discharges (DBD) plasma. Appl Sur Sci, 407:412-417. Dimitriou A, Hale M D, Spear M J. 2016. The effect of four methods of surface activation for improved adhesion of wood polymer composites (WPCs). Int J Adhes Adhes, 68:188-194 Huang H L, Wang B J, Dong L J, et al. 2011. Wettability of hybrid poplar veneers with cold plasma treatments in relation to drying conditions. Drying Technology, 29(3):323-330. Riccardi C,Barni R,Selli E,et al. 2003.Surface modification of poly(ethylene terephthalate)fibers induced by radio frequency air plasma treatment. Applied Surface Science,211(1/4):386-397. |