重组竹制造与应用技术研究进展

doi:10.11707/j.1001-7488.LYKX20210665

摘要/Abstract

摘要：

重组竹是以竹材为原料，以竹束或竹纤维化单板为基体单元与树脂增强体胶合而成的复合生物质材料，是实现竹材高效、高值化利用的有效途径之一，已成为竹产业的主流产品。目前，重组竹因物理力学性能优良，实现了竹材应用从室内地板、家具、水泥模板向风电叶片、耐候景观材和户外结构材的拓展，但作为一种新产品，需针对其使用过程中出现的问题和需求进行基础科学问题、关键创新技术与应用工程技术的联合攻关。本研究综合国内外公开报道的相关文献，系统梳理重组竹制造中单元制备、热处理、浸胶干燥与成型过程中技术科学内涵、交叉响应机理和制备调控机制，总结重组竹性能评价与功能化应用中的技术特征，剖析重组竹制造与应用技术过程中的关键科学问题，借鉴复合材料、多孔材料与生物质材料的研究成果，提出重组竹制造与应用技术研究与实践中需要加强和改进的方向，并进一步明确重组竹制造与应用过程中的装备研发和增强量化效应，为重组竹的科学应用提供理论依据和技术支撑。

关键词: 重组竹, 制造, 应用, 技术, 机理

Abstract:

Bamboo scrimber is a kind of biomass composite material, which is prepared from bamboo fiber mat (as matrix) and resin (as reinforcement). It is one of the effective ways to achieve the efficient and high-valued utilization of bamboo, and has become to main products of bamboo industry in China. The bamboo scrimber performed great physical and mechanical properties, which developed in both applications of indoor and outdoor, including floor, bamboo furniture, cement template, wind-power blades, weather resistance landscape and architecture structural materials. However, the basic scientific issue, key innovative technologies and applied engineering technologies were still need to be studied together. In this study, the technical connotation, cross-response mechanism and manufacturing regulatory mechanism of bamboo unit, heat treatment, resin impregnation, drying and modeling process were classified according to the published reports that discussed and summarized the performance evaluation and functional application of bamboo scrimber. The improvement of product and application techniques was put forward, basing on the analysis of the scientific issues and results of composite, porous materials and biomass materials. Moreover, the upgrade of equipment and the enhancement effect of bamboo scrimber was defined to provide theoretical and technical support of scientific application.

Key words: bamboo scrimber, technology, properties, application, mechanism

中图分类号:

TS653

齐越,吴江源,任丁华,于文吉,张亚慧. 重组竹制造与应用技术研究进展[J]. 林业科学, 2023, 59(6): 159-168.

Yue Qi,Jiangyuan Wu,Dinghua Ren,Wenji Yu,Yahui Zhang. The Development in Manufacture and Application Technology of Bamboo Scrimber[J]. Scientia Silvae Sinicae, 2023, 59(6): 159-168.

图/表 4

参考文献 0

	薄　燕. 2014. 重组竹中的游离苯酚及VOCs释放规律研究. 北京: 中国林业科学研究院.
	Bo Y. 2014. Study on the determination of free phenol and VOCs in the bamboo scrimber. Beijing: Chinese Academy of Forestry.［in Chinese］
	陈伯望, 高丹萍, 李　频, 等. 重组竹梁长期受弯性能试验研究及蠕变分析. 四川建筑科学研究, 2020, 46 (5): 50- 56.
	Chen B W, Gao D P, Li P, et al. Experimental research and creep analysis of bending properties of bamboo scrimber beam under long-term load. Sichuan Building Science, 2020, 46 (5): 50- 56.
	陈复明, 江泽慧, 王　戈, 等. 瓦楞型竹束单板复合材料的制备及力学性能表征. 复合材料学报, 2013, 30 (3): 82- 86.
	Chen F M, Jiang Z H, Wang G, et al. Preparation and mechanical properties of corrugated bamboo bundle laminated composites. Acta Materiae Compositae Sinica, 2013, 30 (3): 82- 86.
	陈卫民, 李新功, 袁光明, 等. 阻燃型竹木重组材制备及性能. 化工新型材料, 2015, 43 (8): 93- 95.
	Chen W M, Li X G, Yuan G M, et al. Preparation and characterization of flame retardant bamboo-wood hybrid scrimber. New Chemical Materials, 2015, 43 (8): 93- 95.
	陈祥海. 2019. 基于MQTT协议的重组竹生产监控管理系统的设计与实现. 济南: 山东大学.
	Chen X H. 2019. Design and implementation of reorganized bamboo production monitoring and management system based on MQTT protocol. Jinan: Shandong University.［in Chinese］
	崔　璨. 2016. 重组竹喷蒸热压工艺的研究. 南京: 南京林业大学.
	Cui C. 2016. Study on the steaming and hot pressing technology of bamboo scrimber. Nanjing: Nanjing Forestry University.［in Chinese］
	龚　正, 袁少飞, 王洪艳, 等. 重组竹材竹方冷压装料自动化生产线优化设计与分析. 浙江林业科技, 2019, 39 (6): 92- 99. doi: 10.3969/j.issn.1001-3776.2019.06.015
	Gong Z, Yuan S F, Wang H Y, et al. Design of feeding operation from cold press automatic production line for bamboo scrimber. Journal of Zhejiang Forestry Science and Technology, 2019, 39 (6): 92- 99. doi: 10.3969/j.issn.1001-3776.2019.06.015
	黄道榜. 2018. 无机复合溶胶-凝胶对重组竹防霉性能的影响. 福州: 福建农林大学.
	Huang D B. 2018. Effect of inorganic compound sol-gel on mildew resistance of bamboo scrimber. Fuzhou: Fujian Agriculture and Forestry University.［in Chinese］
	胡玉安. 2014. 染色重组竹制备工艺研究与性能评价. 北京: 中国林业科学研究院.
	Hu Y A. 2014. Influence of dyeing treatments on the performance of bamboo scrimber. Beijing: Chinese Academy of Forestry.［in Chinese］
	靳肖贝, 张禄晟, 李瑜瑶, 等. 3种阻燃剂对重组竹燃烧性能和物理力学性能的影响. 西北林学院学报, 2015, 30 (5): 214- 218. doi: 10.3969/j.issn.1001-7461.2015.05.36
	Jin X B, Zhang L S, Li Y Y, et al. Effects of three flame retardants on combustion, physical and mechanical properties of bamboo scrimber. Journal of Northwest Forestry University, 2015, 30 (5): 214- 218. doi: 10.3969/j.issn.1001-7461.2015.05.36
	李腊梅, 马红霞, 李兴伟, 等. 浸胶竹束贮存时间对酚醛树脂胶合性能的影响. 广东林业科技, 2019, 35 (1): 18- 22.
	Li L M, Ma H X, Li X W, et al. Effect of the time of soak glue bamboo bundle on the adhesive properties of phenolic resin. Guangdong Forestry Science and Technology, 2019, 35 (1): 18- 22.
	李　频. 2018. 结构用重组竹受弯性能试验研究. 长沙: 中南林业科技大学.
	Li P. 2018. The experimental research on flexural properties of bamboo scrimber beam. Changsha: Central South University of Forestry & Technology.［in Chinese］
	刘　勋. 2016. 重组竹材损伤断裂行为研究. 重庆: 重庆交通大学.
	Liu X. 2016. Study on damage and fracture of reconstituted bamboo. Chongqing: Chongqing Jiaotong University.［in Chinese］
	刘学莘, 林志伟, 关　鑫. 重组竹材料表面透明涂饰性能研究. 齐鲁工业大学学报, 2016, 30 (1): 18- 20.
	Liu X S, Lin Z W, Guan X. Study on painting performance of re-combined bamboo timber with clear coating. Journal of Qilu University of Technology, 2016, 30 (1): 18- 20.
	刘玉琪. 2019. 重组竹柱轴心受压试验研究. 长沙: 中南林业科技大学.
	Liu Y Q. 2019. The experimental study on axial compression of reconsolidated bamboo columns. Changsha: Central South University of Forestry & Technology.［in Chinese］
	李霞镇. 2013. 重组竹螺栓连接节点承载性能研究. 北京: 中国林业科学研究院.
	Li X Z. 2013. Research on bearing performance of bolt joint for recombinant bamboo . Beijing: Chinese Academy of Forestry.［in Chinese］
	李玉顺, 张秀华, 吴培增, 等. 重组竹在长期荷载作用下的蠕变行为. 建筑材料学报, 2019, 22 (1): 65- 71.
	Li Y S, Zhang X H, Wu P Z, et al. Creep behavior of bamboo scrimber under long-term load. Journal of Building Materials, 2019, 22 (1): 65- 71.
	娄志超, 袁成龙, 李延军, 等. 饱和蒸汽热处理对竹束化学成分和结晶度的影响. 林业工程学报, 2020, 5 (2): 29- 35.
	Lou Z C, Yuan C L, Li Y J, et al. Effect of saturated steam treatment on the chemical composition and crystallinity properties of bamboo bundles. Journal of Forestry Engineering, 2020, 5 (2): 29- 35.
	毛燕清, 侯伦灯, 俞先禄. 降压工艺对竹重组材性能的影响. 森林与环境学报, 2015, 35 (2): 175- 178.
	Mao Y Q, Hou L D, Yu X L. Effect of decreased pressure on the properties of reconstituted bamboo lumber. Journal of Forest and Environment, 2015, 35 (2): 175- 178.
	孟凡丹. 2011. 纤维化竹单板重组材的制造技术及性能研究. 哈尔滨: 东北林业大学.
	Meng F D. 2011. Manufacturing technology and properties of scimber of bamboo fibrillated-veneer lumber. Harbin: Northeast Forestry University.［in Chinese］
	孟凡丹. 2017. 竹基纤维复合材料胶合界面及机理研究. 北京: 北京林业大学.
	Meng F D. 2017. Study on the bonding interface and mechanism of bamboo based fiber composites. Beijing: Beijing Forestry University.［in Chinese］
	齐锦秋. 2013. 基于竹材维管束和纤维形态特征的竹基纤维复合材料性能研究. 北京: 中国林业科学研究院.
	Qi J Q. 2013. Evaluation of the performances of bamboo based fiber composites based on the characteristics of vascular bundle and fiber. Beijing: Chinese Academy of Forestry.［in Chinese］
	齐锦秋, 于文吉, 谢九龙, 等. 竹基纤维复合材料纤维化单板的形态研究. 木材工业, 2012, 26 (2): 6- 9.
	Qi J Q, Yu W J, Xie J L, et al. Morphologies of crushed bamboo veneer used for bamboo-based fiber composites. China Wood Industry, 2012, 26 (2): 6- 9.
	邱亚新. 2013. 竹束单板整张化及其层积材性能的研究. 北京: 中国林业科学研究院.
	Qiu Y X. 2013. The properties on bamboo bundle veneer and bamboo-bundle laminated veneer lumber. Beijing: Chinese Academy of Forestry.［in Chinese］
	任一萍, 刘红征, 郭文静, 等. 两种树脂胶合重组竹结构材的性能比较. 森林工程, 2019, 35 (2): 45- 49.
	Ren Y P, Liu H Z, Guo W J, et al. Adhesion performance comparison of structural bamboo scrimber with two kinds of resin. Forest Engineering, 2019, 35 (2): 45- 49.
	上官蔚蔚. 2015. 重组竹物理力学性质基础研究. 北京: 中国林业科学研究院.
	Shangguan W W. 2015. Research on physical and mechanical properties of bamboo scrimber. Beijing: Chinese Academy of Forestry.［in Chinese］
	盛宝璐, 周爱萍, 黄东升, 等. 重组竹的顺纹拉压强度与本构关系. 南京林业大学学报(自然科学版), 2015a, 39 (5): 123- 128.
	Sheng B L, Zhou A P, Huang D S, et al. Uniaxial strength and constitutive law of parallel strand bamboo. Journal of Nanjing Forestry University (Natural Science Edition), 2015a, 39 (5): 123- 128.
	盛宝璐, 周爱萍, 黄东升. 重组竹的单轴与纯剪应力应变关系. 土木建筑与环境工程, 2015b, 37 (6): 24- 31.
	Sheng B L, Zhou A P, Huang D S, et al. Stress-strain relationship of parallel strand bamboo under uniaxial or pure shear load. Journal of Chongqing Jianzhu University, 2015b, 37 (6): 24- 31.
	宋文智. 重组竹材自动化生产线主要设备研制与开发. 现代制造技术与装备, 2017, (6): 164- 165.
	Song W Z. Development and development of major equipment for reorganization of bamboo automatic production line. Modern Manufacturing Technology and Equipment, 2017, (6): 164- 165.
	宋晓东. 2017. 新型重组竹-混凝土组合桥面板力学性能研究. 南京: 东南大学.
	Song X D. 2017. Study on mechanical properties on new reconstituted bamboo-concrete bridge deck. Nanjing: Southeast University.［in Chinese］
	孙丽惟, 卞玉玲, 周爱萍, 等. 重组竹短期蠕变性能研究. 林业工程学报, 2020, 5 (2): 69- 75.
	Sun L W, Bian Y L, Zhou A P, et al. Study on short-term creep property of bamboo scrimber. Journal of Forestry Engineering, 2020, 5 (2): 69- 75.
	孙润鹤. 2013. 竹材高温干燥与热处理一体化技术研究. 长沙: 中南林业科技大学.
	Sun R H. 2013. The study on the integrated technology about high temperature drying and thermal treatment of bamboo. Changsha: Central South University of Forestry & Technology.［in Chinese］
	苏　团, 于再君, 侯伦灯, 等. 竹重组材浸渍纸饰面工艺. 林业科技开发, 2014, (5): 99- 101. doi: 10.13360/j.issn.1000-8101.2014.05.024
	Su T, Yu Z J, Hou L D, et al. Technology on overlaying reconstituted bamboo lumber with impregnated paper. China Forestry Science and Technology, 2014, (5): 99- 101. doi: 10.13360/j.issn.1000-8101.2014.05.024
	陶振平. 2014. 重组竹家具雕刻工艺研究. 长沙: 中南林业科技大学.
	Tao Z P. 2014. The research on carving process of recombinant bamboo furniture. Changsha: Central South University of Forestry & Technology.［in Chinese］
	王　纯. 2015. 竹束活性染料染色特性与工艺研究. 长沙: 中南林业科技大学.
	Wang C. 2015. The research on the staining characteristics and technology of the bamboo bundles reactive dyes. Changsha: Central South University of Forestry & Technology.［in Chinese］
	王春霞, 赵　磊, 刘浩阳, 等. 竹材浸渍用酚醛树脂的合成及表征. 林业机械与木工设备, 2012, 40 (8): 14- 16.
	Wang C X, Zhao L, Liu H Y, et al. Synthesis and characterization of phenolic resin for bamboo impregnation. Forestry Machinery & Woodworking Equipment, 2012, 40 (8): 14- 16.
	王　燕, 李贤军, 吕建雄, 等. 重组竹制造用竹束的浸胶工艺优化研究. 中南林业科技大学学报, 2013, 33 (10): 153- 157. doi: 10.3969/j.issn.1673-923X.2013.10.031
	Wang Y, Li X J, Lü J X, et al. Optimization adhesive impregnation conditions of bamboo bundles used for making reconsolidated bamboo composite. Journal of Central South University of Forestry & Technology, 2013, 33 (10): 153- 157. doi: 10.3969/j.issn.1673-923X.2013.10.031
	魏　洋, 周梦倩, 袁礼得. 重组竹柱偏心受压力学性能. 复合材料学报, 2016, 33 (2): 379- 385. doi: 10.13801/j.cnki.fhclxb.20150703.002
	Wei Y, Zhou M Q, Yuan L. Mechanical performance of glulam bamboo columns under eccentric loading. Acta Materiae Compositae Sinica, 2016, 33 (2): 379- 385. doi: 10.13801/j.cnki.fhclxb.20150703.002
	魏　洋, 纪雪微, 端茂军, 等. 重组竹轴向应力-应变关系模型. 复合材料学报, 2018, 35 (3): 572- 579. doi: 10.13801/j.cnki.fhclxb.20170608.002
	Wei Y, Ji X W, Duan M J, et al. Model for axial stress-strain relationship of bamboo scrimber. Acta Materiae Compositae Sinica, 2018, 35 (3): 572- 579. doi: 10.13801/j.cnki.fhclxb.20170608.002
	吴培增. 2015. 重组竹蠕变性能试验与分析. 哈尔滨: 东北林业大学.
	Wu P Z. 2015. Experiment and analysis on creep properties of reconsolidated scrimber. Harbin: Northeast Forestry University.［in Chinese］
	袁凯宇. 2019. 重组竹Ⅰ型断裂能试验研究. 南京: 南京林业大学.
	Yuan K Y. 2019. Experimental study on mode typeⅠfracture energy of parallel strand bamboo. Nanjing: Nanjing Forestry University.［in Chinese］
	余良崇, 陈玉霞, 郭　勇, 等. 重组竹中螺钉连接性能研究. 中国木材, 2015, (5): 35- 37.
	Yu L C, Chen Y X, Guo Y, et al. Study on the connection performance of scrimber screws. Chinese Timber, 2015, (5): 35- 37.
	于雪斐, 于文吉. 疏解纤维化慈竹单板的性能. 东北林业大学学报, 2013, 41 (2): 74- 76. doi: 10.13759/j.cnki.dlxb.2013.02.002
	Yu X F, Yu W J. Performance research on crushed bamboo veneer for Bambusa distegia . Journal of Northeast Forestry University, 2013, 41 (2): 74- 76. doi: 10.13759/j.cnki.dlxb.2013.02.002
	余养伦. 2014. 高性能竹基纤维复合材料制造技术及机理研究. 北京: 中国林业科学研究院.
	Yu Y L. 2014. Manufacturing technology and mechanism of high performance bamboo-based fiber composites. Beijing: Chinese Academy of Forestry.［in Chinese］
	张　建, 袁少飞, 范　慧, 等. 5种防腐防霉剂对重组竹材抑菌效果的影响. 浙江林业科技, 2016, 36 (5): 8- 12.
	Zhang J, Yuan S F, Fan H, et al. Effect of different antimildew and antiseptic agents on reconstructed bamboo timber. Journal of Zhejiang Forestry Science and Technology, 2016, 36 (5): 8- 12.
	张苏俊, 赵志高, 张文娟, 等. 重组竹梁抗弯性能试验. 扬州大学学报(自然科学版), 2016, 19 (1): 51- 54,67. doi: 10.19411/j.1007-824x.2016.01.012
	Zhang S J, Zhao Z G, Zhang W J, et al. Research on the flexural performance of bamboo scrimber. Journal of Yangzhou University (Natural Science Edition), 2016, 19 (1): 51- 54,67. doi: 10.19411/j.1007-824x.2016.01.012
	张文福. 2012. 圆竹性能评价及其帚化加工技术的研究. 北京: 中国林业科学研究院.
	Zhang W F. 2012. Mechanical properties and brooming processing of bamboo-culm. Beijing: Chinese Academy of Forestry.［in Chinese］
	张亚慧, 马红霞, 孟凡丹, 等. 浸胶方式对竹基纤维复合材料性能的影响. 林产工业, 2017, 44 (9): 24- 27. doi: 10.19531/j.issn1001-5299.201709005
	Zhang Y H, Ma H X, Meng F D, et al. Effects of impregnating methods on the properties of bamboo-based fiber composites. China Forest Products Industry, 2017, 44 (9): 24- 27. doi: 10.19531/j.issn1001-5299.201709005
	张亚慧, 祝荣先, 于文吉, 等. 浸胶竹纤维化单板干燥温度对竹基纤维复合材料性能的影响. 木材工业, 2011, 25 (6): 1- 3. doi: 10.19455/j.mcgy.2011.06.001
	Zhang Y H, Zhu R X, Yu W J, et al. Glue-impregnated bamboo-mat drying temperature effect on crushed bamboo-mat composite properties. China Wood Industry, 2011, 25 (6): 1- 3. doi: 10.19455/j.mcgy.2011.06.001
	张亚慧, 孟凡丹, 于文吉. 白夹竹和寿竹制备竹基纤维复合材料初探. 中国人造板, 2013, 20 (1): 13- 16. doi: 10.3969/j.issn.1673-5064.2013.01.003
	Zhang Y H, Meng F D, Yu W. Study on performance of bamboo-based fiber composites prepared with Phyllostachys bissetii McClure and Phyllostachys bambusoides fshouzhu yi . China Wood-Based Panels, 2013, 20 (1): 13- 16. doi: 10.3969/j.issn.1673-5064.2013.01.003
	张亚慧, 祝荣先, 于文吉, 等. 户外用竹基纤维复合材料加速老化耐久性评价. 木材工业, 2012, 26 (5): 6- 8. doi: 10.19455/j.mcgy.2012.05.002
	Zhang Y H, Zhu R X, Yu W J, et al. Performance of exterior crushed bamboo-mat composite after accelerated aging test. China Wood Industry, 2012, 26 (5): 6- 8. doi: 10.19455/j.mcgy.2012.05.002
	张亚梅. 2013. 热处理对竹基纤维复合材料性能影响的研究. 北京: 中国林业科学研究院.
	Zhang Y M. 2013. Effect of thermos- treatment on the properties of bamboo-based fiber composites. Beijing: Chinese Academy of Forestry.［in Chinese］
	钟　永. 2018. 结构用重组竹及其复合梁的力学性能研究. 北京: 中国林业科学研究院.
	Zhong Y. 2018. Research on mechanical properties of structural bamboo scrimber and its composite beams. Beijing: Chinese Academy of Forestry.［in Chinese］
	Deng J C, Chen F M, Li H D, et al. The effect of PF/PVAC weight ratio and ambient temperature on moisture absorption performance of bamboo-bundle laminated veneer lumber. Polymer Composites, 2016, 37 (3): 955- 962. doi: 10.1002/pc.23255
	Gu L, Zhou Y F, Mei T T, et al. Carbon footprint analysis of bamboo scrimber flooring-implications for carbon sequestration of bamboo forests and its products. Forests, 2019, 10 (1): 51. doi: 10.3390/f10010051
	Kumar A, Ryparovà P, Kasal B, et al. Resistance of bamboo scrimber against white-rot and brown-rot fungi. Wood Material Science & Engineering, 2020, 15 (1): 57- 63.
	Meng F D, Liu R, Zhang Y H, et al. Improvement of the water repellency, dimensional stability, and biological resistance of bamboo-based fiber reinforced composites. Polymer Composites, 2019, 40 (2): 506- 513. doi: 10.1002/pc.24677
	Pineda H, Hu Y A, Semple K, et al. Computer simulation of the mat formation of bamboo scrimber composites. Composites Part A:Applied Science and Manufacturing, 2021, 149, 106542. doi: 10.1016/j.compositesa.2021.106542
	Rao F, Chen Y H, Li N, et al. Preparation and characterization of outdoor bamboo-fiber-reinforced composites with different densities. BioResources, 2017, 12 (3): 6789- 6811.
	Rao F, Ji Y H, Huang Y X, et al. Influence of resin molecular weight on bonding interface, water resistance, and mechanical properties of bamboo scrimber composite. Construction and Building Materials, 2021, 292, 123458. doi: 10.1016/j.conbuildmat.2021.123458
	Rao F, Ji Y H, Li N, et al. Outdoor bamboo-fiber-reinforced composite: influence of resin content on water resistance and mechanical properties. Construction and Building Materials, 2020, 261, 120022. doi: 10.1016/j.conbuildmat.2020.120022
	Wang J, Cao P X, Guo X L, et al. Effect of process parameters on cutting forces and surface roughness during peripheral up milling of bamboo scrimber. BioResources, 2015, 10 (4): 8414- 8425.
	Wei Y, Yan S, Zhao K, et al. Experimental and theoretical investigation of steel-reinforced bamboo scrimber beams. Engineering Structures, 2020, 223, 111179. doi: 10.1016/j.engstruct.2020.111179
	Xie J L, Qi J Q, Hu T X, et al. Effect of fabricated density and bamboo species on physical-mechanical properties of bamboo fiber bundle reinforced composites. Journal of Materials Science, 2016, 51 (16): 7480- 7490. doi: 10.1007/s10853-016-0024-3
	Xie P, Liu W, Hu Y C, et al. Size effect research of tensile strength of bamboo scrimber based on boundary effect model. Engineering Fracture Mechanics, 2020, 239, 107319. doi: 10.1016/j.engfracmech.2020.107319
	Xu Q F, Chen L Z, Harries K A, et al. Combustion performance of engineered bamboo from cone calorimeter tests. European Journal of Wood and Wood Products, 2017, 75 (2): 161- 173. doi: 10.1007/s00107-016-1074-6
	Yu Y L, Huang X A, Yu W J. A novel process to improve yield and mechanical performance of bamboo fiber reinforced composite via mechanical treatments. Composites Part B:Engineering, 2014a, 56 (1): 48- 53.
	Yu Y L, Huang X A, Yu W J. High performance of bamboo-based fiber composites from long bamboo fiber bundles and phenolic resins. Journal of Applied Polymer Science, 2014b, 115 (3): 1891- 1897.
	Yu Y L, Huang Y X, Zhang Y H, et al. The reinforcing mechanism of mechanical properties of bamboo fiber bundle-reinforced composites. Polymer Composites, 2019, 40 (4): 1463- 1472. doi: 10.1002/pc.24885
	Zhang Y H, Huang Y X, Ma H X, et al. Effect of different pressing processes and density on dimensional stability and mechanical properties of bamboo fiber-based composites. Journal of the Korean Wood Science and Technology, 2018, 46 (4): 355- 361. doi: 10.5658/WOOD.2018.46.4.355
	Zhang Y H, Yu W J, Kim N, et al. Mechanical performance and dimensional stability of bamboo fiber-based composite. Polymers, 2021, 13 (11): 1732. doi: 10.3390/polym13111732
	Zhang Y H, Ma H X, Qi Y, et al. Study of the long-term degradation behavior of bamboo scrimber under natural weathering. npj Materials degradation, 2022, 6, 63. doi: 10.1038/s41529-022-00273-x
	Zhao P, Zhang X. Size effect of section on ultimate compressive strength parallel to grain of structural bamboo scrimber. Construction and Building Materials, 2019, 200, 586- 590. doi: 10.1016/j.conbuildmat.2018.12.088
	Zhong Y, Ren H Q, Jiang Z H. Effects of temperature on the compressive strength parallel to the grain of bamboo scrimbe. Materials, 2016, 9 (6): 436. doi: 10.3390/ma9060436
	Zhu R X, Zhang Y H, Yu W J. Outdoor exposure tests of bamboo-fiber reinforced composite: evaluation of the physical and mechanical properties after two years. European Journal of Wood and Wood Products, 2015, 73 (2): 275- 278. doi: 10.1007/s00107-014-0873-x

[1]	王茹,罗莎莎,王如月,杨梦思,孙雅丽,虎海防,张萍. 不同生长时期核桃叶片中挥发性有机物的GC-IMS分析[J]. 林业科学, 2023, 59(6): 57-73.
[2]	郑加强,徐幼林,张慧春,周宏平,李秋洁. 国内外林业有害生物防治靶标识别技术的研究与展望[J]. 林业科学, 2023, 59(3): 152-166.
[3]	汤志颖,高俊宏,曾赞青,王淼淼,漆良华. 竹类植物茎秆液流研究：方法、特征及影响因素[J]. 林业科学, 2022, 58(9): 157-164.
[4]	宁可, 张雪, 朱哲毅, 沈月琴. 信息干预、测土配方施肥技术与经济林化肥减量——基于信息传递的视角[J]. 林业科学, 2022, 58(7): 103-119.
[5]	陈晨,陈虹,倪铭,张子晗,喻方圆. 油菜素内酯调控植物生长发育的研究进展[J]. 林业科学, 2022, 58(7): 144-155.
[6]	金枝,李伯涛,尹江苹,陈倩,付跃进,吕斌. 木材孔隙连通性评价研究进展[J]. 林业科学, 2022, 58(5): 177-186.
[7]	杜恬恬,代松,钱滕,朱铭玮,陈丽,张中会,李淑娴. 基于核磁共振技术的合欢种子吸水特性[J]. 林业科学, 2022, 58(4): 22-31.
[8]	王戈,韩善宇,陈复明,马晓宇,任学勇. 竹材振动阻尼性能及其在竹质复合材料中的应用[J]. 林业科学, 2022, 58(1): 127-137.
[9]	王翠翠,李明鹏,王戈,顾少华,程海涛. 植物纤维/热塑性聚合物预浸料在汽车轻量化领域的应用进展[J]. 林业科学, 2021, 57(9): 168-180.
[10]	李霞镇,任海青,李贤军,钟永,徐康,郝晓峰. 重组竹-钢夹板螺栓连接节点承载特性和破坏形态[J]. 林业科学, 2021, 57(8): 157-166.
[11]	彭金根,姜雪茹,谢利娟,刘燕. 小叶黄杨越冬叶片呈色及其温光影响因子[J]. 林业科学, 2021, 57(2): 49-61.
[12]	张亚梅,余养伦,于文吉. 户外用重组竹防蓝变处理工艺及性能[J]. 林业科学, 2021, 57(12): 140-146.
[13]	杨春梅,宁礼佳,刘清伟,缪骞,马岩,刘九庆. LOM薄木层积热压过程中温度实时模拟模型构建[J]. 林业科学, 2021, 57(10): 120-127.
[14]	王艳梅,张小雪,朱秀征,张志华,李志,耿晓东,蔡齐飞,刘震. 林木种子休眠与萌发机制研究进展[J]. 林业科学, 2021, 57(10): 128-144.
[15]	申思凡,张真,孔祥波,刘福,张苏芳. 昆虫气味受体研究技术及其在林业昆虫中的应用研究进展[J]. 林业科学, 2020, 56(5): 150-159.