欢迎访问林业科学,今天是

林业科学 ›› 2021, Vol. 57 ›› Issue (9): 181-192.doi: 10.11707/j.1001-7488.20210918

• 研究简报 • 上一篇    

基于射线分割的林木应力波断层成像算法

刘涛,李光辉*   

  1. 江南大学人工智能与计算机学院 无锡 214122
  • 收稿日期:2020-05-06 出版日期:2021-09-25 发布日期:2021-11-29
  • 通讯作者: 李光辉
  • 基金资助:
    江苏省重点研发计划社发项目(BE2016627);江苏省农业科技自主创新资金项目

Stress Wave Tomography Imaging Algorithm Based on Ray Segmentation for Nondestructive Testing of Wood

Tao Liu,Guanghui Li*   

  1. School of Artificial Intelligence and Computer Science, Jiangnan University Wuxi 214122
  • Received:2020-05-06 Online:2021-09-25 Published:2021-11-29
  • Contact: Guanghui Li

摘要:

目的: 提出一种基于射线分割的林木应力波断层成像算法,研究应力波在林木横截面上的信号分布情况,提高应力波断层成像精度,准确反映林木内部缺陷的位置、大小和腐朽程度。方法: 选取4株原木样本(松树、乌桕)和4株活树样本(香樟、圆柏、柳树)进行应力波断层成像试验,利用FAKOPP应力波检测仪采集样本横截面应力波数据。首先校正采集的应力波速度,绘制应力波传播射线图,对成像区域进行网格划分;然后分割每一条应力波传播射线,基于已知射线传播速度估算待分割射线上多条线段的速度,增加应力波信号量,得到改进的应力波传播射线图;最后根据改进的应力波传播射线图估算成像区域内网格单元的速度,结合图像处理方法,生成断层图像。为验证算法的可行性,使用Resistograph微钻阻力仪评估活树内部健康状况。结果: 基于射线分割的林木应力波断层成像算法能够较准确地重建4株原木样本的断层图像。使用Resistograph微钻阻力仪对活树进行多路径钻探,与阻力曲线图相比发现,基于射线分割的林木应力波断层成像算法生成的断层成像具有较高精度。结论: 基于射线分割的林木应力波断层成像算法可提高初始网格单元速度的准确性和相关性,能够实现林木内部缺陷的高精度成像,适用于林木无损检测。

关键词: 应力波, 无损检测, 射线分割, 断层成像

Abstract:

Objective: Stress wave nondestructive testing technology has been widely applied in wood and tree defect detection. The traditional stress wave imaging algorithm has low accuracy due to the limited sensor number. To improve the accuracy of the stress wave imaging algorithm and accurately reflect the position, size and decay of the internal defects of wood, the signal distribution of the stress wave on the cross section was investigated. Method: Four log samples(Pinus spp., Sapium sebiferum) and four live trees(Cinnamomum camphora, Sabina chinensis, Salix spp.) in Jiangnan University campus were selected as the samples for experiments, and the stress wave velocities were collected using FAKOPP instrument. Firstly, the stress wave velocities were corrected, and the wave ray diagram was generated, then the cross section was divided into many grid cells. Secondly, each stress wave ray was segmented, and the velocity of multiple segments on the ray was estimated, therefore the stress wave signal amount was increased and an improved stress wave ray diagram was also obtained. The velocity values of the grid cells were estimated using the improved propagation rays and the image processing method, thus the tomographic image of wood was generated. The Resistograph micro-drilling tool was used to evaluate the internal conditions of the live trees. Result: Experimental results showed that the proposed algorithm could accurately reconstruct the tomographic images of the four log samples. The Resistograph micro-drilling tool was used to perform multi-path drilling on live trees to get the resistance curves. Compared with the resistance curves, it was demonstrated that the proposed algorithm could also generated the tomographic images with a high resolution of 4 live trees. Conclusion: Based on the ray segmentation, the proposed algorithm might improve the accuracy and correlation of the initial grid cell velocity value, which could achieve high-quality imaging of wood defects, and could be effectively applied to nondestructive testing of wood.

Key words: stress wave, non-destructive testing, ray segmentation, acoustic tomography

中图分类号: