欢迎访问林业科学,今天是

›› 1989, Vol. 25 ›› Issue (1): 51-57.

• 论文及研究报告 • 上一篇    下一篇

GJ-85油锯最佳匹配参数的研究

王多绪 时献江   

  1. 东北林业大学
  • 收稿日期:1987-08-05 修回日期:1900-01-01 出版日期:1989-01-25 发布日期:1989-01-25

RESEARCH ON THE BEST MATCH PARAMETERS OF GJ-85 CHAIN SAW

Wang Duoxu,Shi Xianjiang   

  1. Northeast Forestry University
  • Received:1987-08-05 Revised:1900-01-01 Online:1989-01-25 Published:1989-01-25

摘要: 按国产GJ-85油锯的结构参数,采用二次回归正交试验设计方法,在试验台上进行一系列模拟试验,对测得的数据进行了分析和处理,得出锯木功率、锯木生产率和单位面积能耗同锯链切削速度、进锯力和锯口长度之间的关系式。根据关系式求出单位面积能耗最小时的锯切状态即最佳匹配时参数。经计算分析,对GJ-85油锯提出了改进提高的理论依据和合理运用的条件。

关键词: 油锯, 匹配, 锯切, 速度, 能耗

Abstract: According to the structural parameters of GJ-85 chain saw made domestically, a series of imitating tests have were been made by using dual regression orthogonality test on the test table. The relationships between cutting power, cutting productivity, the consumed energy per unit-area and cutting speed of chain, cutting force and cutting length have were been obtained by analysing and treating the measured data, according which, the best match parameters have were been found out. The theoretical basis of improvement and the conditions of reseanable application have were been put forward to the GJ-85 chain saw by analysing and calculating.

Key words: Gasoline chaine saw, Match, Catting, Speed, Efficiency, Energy consumption