王晓旭, 黄安民, 杨忠,等.2011. 近红外光谱用于杉木木材强度分等的研究. 光谱学与光谱分析, 31(4): 975-978.
(Wang X X, Huang A M, Yang Z, et al. 2011. Study on the wood grading by near infrared spectroscopy. Spectroscopy and Spectral Analysis, 31(4): 975-978. [in Chinese] )
赵荣军, 霍小梅, 上官蔚蔚,等.2011. 近红外光谱法预测粗皮桉木材气干密度的影响因素分析. 光谱学与光谱分析, 31(11): 2948-2951.
(Zhao R J, Huo X M, Shangguan W W, et al. 2011. Influence factor for prediction of air-dry density of Eucalyptus pellita by near infrared spectroscopy. Spectroscopy and Spectral Analysis, 31(11): 2948-2951. [in Chinese] )
赵荣军, 霍小梅, 张黎.2009. 利用近红外光谱技术预测粗皮桉木材弹性模量. 光谱学与光谱分析, 29(9): 2392-2395.
(Zhao R J, Huo X M, Zhang L. 2009. Estimation of modulus of elasticity of Eucalyptus pellita wood by near in frared spectroscopy. Spectroscopy and Spectral Analysis, 29(9): 2392-2395. [in Chinese] )
Celen I, Harper D, Labbe N. 2008. A multivariate approach to the acetylated poplar wood samples by near infrared spectroscopy. Holzforschung, 62(2): 189-196.
Chang H T, Chang S T. 2002. Moisture excluding efficiency and dimensional stability of wood improved by acetylation. Bioresour Technol, 85(2): 201-204.
Curran P J. 1989. Remote sensing of foliar chemistry. Remote Sens Environ, 30(3): 271-278.
Hageman J A, Westerhuis J A, Smilde A K. 2005. Temperature robust multivariate calibration: an overview of methods for dealing with temperature influences on near infrared spectra. J Near Infrared Spectrosc, 13(1): 53-62.
Hill C A S, Cetin N S. 2000. Surface activation of wood for graft polymerization. Int J Adhesion Adhes, 20(1): 71-76.
Hill C A S. 2008. The reduction in the fibre saturation point of wood due to chemical modification using anhydride reagents: a reappraisal. Holzforschung, 62(4): 423-428.
Hill, C A S, Curling, S, Kwon, J H, et al. 2009. Decay resistance of acetylated and hexanoylated hardwood and softwood species exposed to Coniophora puteana. Holzforschung, 63 (5): 619-625.
Kelley S S, Rials T G, Snell R, et al. 2004. Use of near infrared spectroscopy to measure the chemical and mechanical properties of solid wood. Wood Sci Technol, 38(4): 257-276.
Kumar S. 1994. Chemical modification of wood. Wood Fiber Sci, 26(2): 270-280.
Lande S, Riel S, Schneider M H. 2010. Development of chemometric models based on near infrared spectroscopy and thermogravimetric analysis for predicting the treatment level of furfurylated Scots pine. Wood Sci Technol, 44(2): 189-203.
Larsson P, Simonson R. 1994. A study of strength, hardness and deformation of acetylated Scandinavian softwoods. Holz als Roh-und Werkstoff, 52(2): 83-86.
Obataya E, Yamauchi H. 2005. Compression behaviors of acetylated wood in organic liquids. Part Ⅱ. Drying-set and its recovery. Wood Sci Technol, 39(7): 546-559.
Popescu, C M, Hill, C A S, Curling, S, et al.2014. The water vapour sorption behaviour of acetylated birch wood: how acetylation affects the sorption isotherm and accessible hydroxyl content. Journal of Materials Science, 49(5): 2362-2371.
Pu Y, Ragauskas A J, Lucia L A, et al. 2008. Near-infrared spectroscopy and chemometric analysis for determining oxygen delignification yield. J Wood Chem Technol, 28(2): 122-136.
Ramsden M J, Blake F S R, Fey N J. 1997. The effect of acetylation on the mechanical properties, hydrophobicity, and dimensional stability of Pinus sylvestris. Wood Sci Technol, 31(2): 97-104.
Stefke B, Windeisen E, Schwanninger M, et al. 2008. Determination of the weight percentage gain and of the acetyl group content of acetylated wood by means of different infrared spectroscopic methods. Anal Chem, 80(4): 1272-1279. |