欢迎访问林业科学,今天是

林业科学 ›› 2004, Vol. 40 ›› Issue (4): 157-161.doi: 10.11707/j.1001-7488.20040428

• 论文及研究报告 • 上一篇    下一篇

落叶松木材API胶粘剂弦径面胶接强度的差异

程瑞香 顾继友   

  1. 东北林业大学材料科学与工程学院,哈尔滨150040
  • 收稿日期:2002-10-08 修回日期:1900-01-01 出版日期:2004-07-25 发布日期:2004-07-25

The Difference of Bonding Strength between Radial and Tangential Surfaces of Larch with API Adhesive

Cheng Ruixiang,Gu Jiyou   

  1. Material Science and Engineering College,Northeast Forestry University Harbin150040
  • Received:2002-10-08 Revised:1900-01-01 Online:2004-07-25 Published:2004-07-25

摘要:

对落叶松木材水性高分子异氰酸酯(API)胶粘剂弦径面胶接强度进行了研究。结果表明:落叶松木材API胶粘剂弦径面胶接强度存在着差异,落叶松木材API胶粘剂径切板胶合强度试件的常态压缩剪切强度是弦切板的1.41倍,而反复煮沸压缩剪切强度径切板的却比弦切板的低。落叶松木材本身弦径面顺纹抗剪强度和剪切强度率的试验结果表明:造成落叶松胶合强度试件弦径面常态压缩剪切强度存在差异的根本原因在于落叶松木材本身弦径向的强度存在差异,木材径向的强度比弦向的大,文中对这造成这种差异的原因进行了分析

关键词: 落叶松, 水性高分子异氰酸酯(API)胶粘剂, 胶接强度, 径切板, 弦切板, 压缩剪切强度

Abstract:

Bonding strength for larch(Larix gmelinii)on radial and tangential surfaces were studied in this paper. The results showed that there was significant difference in bonding strength between radial and tangential surfaces. Dry compressing shear strength of quarter-sawn board of larch was 1.41 times of flat-sawn board of larch in normal conditions, but quarter-sawn board of larch had smaller wet compressing shear strength than flat-sawn board for repeatedly boiling samples. The results of shear strength to the grain and shear strength ratio of larch showed that the difference between radial and tangential bonding strength specimens lied in wood structure of larch. That is to say, there was difference in wood strength between radial and tangential surfaces of larch, wood strength of radial surface of larch was bigger than tangential surfaces. The reasons for which quarter-sawn board of larch had smaller wet compressing shear strength than flat-sawn board of larch for repeatedly boiling samples were also analyzed.

Key words: Larix gmelinii, Aqueous polymer isocyanate(API)adhesive, Bonding strength, Quarter-sawn board, Flat-sawn board, Compressing shear strength