陈立娇, 唐勇, 张帆, 等.2009. 硅溶胶改性水性超薄型钢结构防火涂料的研究. 化学研究与应用,21(11):1592-1596.
(Chen L J, Tang Y, Zhang F, et al. 2009. Study on water-borne ultra-thin fire resistive coating modified by silica solution for steel structure. Chemical Research and Application, 21(11):1592-1596. [in Chinese] )
傅深渊, 于红卫, 槐敏. 2002. 复合淀粉胶的制备及在胶合板上的应用. 浙江林学院学报,19(3):269-272.
(Fu S Y, Yu H W, Huai M, et al. 2002. Preparation of compound starch adhesive and its application in plywood. Journal of Zhejiang Forestry College, 19(3):269-272. [in Chinese] )
李晨, 朱丽滨, 顾继友. 2010. 玉米淀粉的氧化工艺对改性低毒脲醛树脂性能的影响.中国胶粘剂,19(3):28-31.
(Li C, Zhu L B, Gu J Y. 2010. Study on the bonding performance of low toxic urea-formaldehyde resin modified with cornstarch. ,19(3):28-31. [in Chinese] )
李晨. 2011. 氧化淀粉改性低毒脲醛树脂的研究. 哈尔滨:东北林业大学硕士学位论文.
(Li C. 2011. Studied on Oxidized starch modified Urea-Formaldehyde resin of low toxicity. Harbin: MS thesis of Northeast Forestry University. [in Chinese] )
李爱萍,阐成友,杜奕, 等. 2006.脲醛树脂合成反应过程的FTIR研究.物理化学学报,22 (7):873-877.
(Li A P, Dan C Y, Du Y, et al. 2006. Study on the evolvement of structure in synthesis of urea-formaldehyde resins by FTIR. Acta Physico-Chimica Sinica, 22 (7):873-877. [in Chinese] )
钱建中. 2006.氧化淀粉改性粉状脲醛树脂胶初探. 木材工业,20(3):41-43.
(Qian J Z. 2006. Preliminary study on modifying urea formaldehyde resin with oxidized starch. China Wood Industry, 20(3):41-43. [in Chinese] )
孙丽丽, 邱凤仙, 杨冬亚,等. 2007. 氧化淀粉改性脲醛树脂的研究. 化工时刊, 21(9):14-16.
(Sun L L, Qiu F X, Yang D Y, et al. 2007. Study on modifying urea formaldehyde resin with oxidized starch. Chemical Industry Times, 21(9):14-16. [in Chinese] )
张东翔, 常玉, 徐红.2003. 影响改性脲醛树脂性能的因素分析研究. 化学与粘合, (2):51-53.
(Zhang D X, Chang Y, Xu H. 2003. Study on the factors affecting performances of modified UF resins. Chemistry and Adhesion, (2):51-53. [in Chinese] )
Basta A H, El-Saied H, Winandy J E, et al. 2011. Preformed amide-containing biopolymer for improving the environmental performance of synthesized urea-formaldehyde in agro-fiber composites. Journal of Polymers and the Environment, 19(2): 405-412.
Costa N, Pereira J, Martins J, et al. 2012. Alternative to latent catalysts for curing UF resins used in the production of low formaldehyde emission wood-based panels. International Journal of Adhesion and Adhesives, 33:56-60.
Cui H, Du G. 2013. Development of a novel polyvinyl acetate type emulsion curing agent for urea formaldehyde resin. Wood Science and Technology, 47(1): 105-119.
Emengo F N, Chukwu S E R, Mozie J. 2002.Tack and bonding strength of carbohydrate-based adhesives from different botanical sources. International Journal of Adhesion and Adhesives, 22(2): 93-100.
Ferg E E, Pizzi A, Levendis D C. 1993. 13C-NMR analysis method for urea-formaldehyde resin strength and formaldehyde emission. Journal of Applied Polymer Science, 50(5): 907-915.
Hse C Y, Higuchi M. 2010. Melamine-bridged alkyl resorcinol modified urea-formaldehyde resin for bonding hardwood plywood. Journal of Applied Polymer Science, 116(5): 2840-2845.
Imam S H, Gordon S H, Mao L. 2001.Environmentally friendly wood adhesive from a renewable plantpolymer: characteristics and optimization. Polymer Degradation and Stability,73 (3):529-533.
Li A, Kan C, Du Y, et al. 2006. Study on the evolvement of structure in synthesis of urea-formaldehyde resins by FTIR. Acta Physico-Chimica Sinica, 22(7): 873-877.
Park B, Kang E C, Park J Y. 2006.Effects of formaldehyde to urea mole ratio on thermal curing behavior of urea-formaldehyde resin and properties of particleboard. Journal of Applied Polymer Science, 101(3):1787-1792.
Sheng Y, Wang Q, Xu X, et al. 2011. Oxidation of cornstarch using oxygen as oxidant without catalyst. LWT-Food Science and technology, 44(1): 139-144.
Ye J, Qiu T, Wang H, et al. 2013. Study of glycidyl ether as a new kind of modifier for urea-formaldehyde wood adhesives. Journal of Applied Polymer Science, 128(6): 4086-4094. |