鲍甫成,王 正,郭文静.2004.杨木和杉木木材表面性质的研究.林业科学,40(2): 131-136.
(Bao F C, Wang Z, Guo W J. 2004. Study on the surface properties of poplar and Chinese fir wood. Scientia Silvae Sinicae,40(2): 131-136. [in Chinese] )
高振忠,孙伟圣.2009.木材用改性淀粉胶黏剂的制备.林业科学,45(7): 106-110.
(Gao Z Z, Sun W S. 2009. Preparation of modified cornstarch adhesive for bonding wood. Scientia Silvae Sinicae,45(7): 106-110. [in Chinese] )
马 岩,潘承怡.2008.微米木纤维模压制品形成的试验装备与工艺.林业科学,44(6): 113-117.
(Ma Y, Pan C Y. 2008. Experimental equipment and technology of forming micron wood fiber mould product. Scientia Silvae Sinicae,44(6): 113-117. [in Chinese] )
马 岩.2002a.木材横断面六棱规则细胞数学描述理论研究.生物数学学报,17(1): 64-68.
(Ma Y. 2002a. Research on mathematical model of wood horizontal section hexagon standard cell. Journal of Biomathematics,17(1): 64-68. [in Chinese] )
马 岩.2002b.微米木纤维定向重组细胞纤维含量的定量求解理论研究.生物数学学报,17(3): 353-357.
(Ma Y. 2002b. Study on quantitatively calculated theory of micro-meter woodfibre directional reconstituted content of cell fibre. Journal of Biomathematics,17(3): 353-357. [in Chinese] )
马 岩.2003.利用微米木纤维定向重组技术形成超高强度纤维板的细胞裂解理论研究.林业科学,39(3): 111-115.
(Ma Y. 2003. Study on cell break theory of using wood fibre micro-meter aligned reconstituted technology forming super high-intensity wood-based panel. Scientia Silvae Sinicae,39(3): 111-115. [in Chinese] )
杨冬霞,马 岩,杨春梅.2012.针叶材在超细粉碎过程中细胞壁断裂的理论计算.西部林业科学,41(3): 42-47.
(Yang D X, Ma Y, Yang C M. 2012. Theoretical calculation of cell wall fracture of coniferous timber. Journal of West China Forestry Science,41(3): 42-47. [in Chinese] )
张启坤,李旭东.2011.木材微观结构的有限元建模.甘肃科技,27(6): 21-23.
Chen X,Wu S,Zhou J,et al.2012.Effect of testing method and strain rate on stress-strain behavior of concrete. Journal of Materials in Civil Engineering,25(11): 1752-1761.
Chen X,Wu S,Zhou J.2013.Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete. Construction and Building Materials,47(8): 419-430.
Dai F,Xia K,Zuo J P,et al.2013.Static and dynamic flexural strength anisotropy of barre granite. Rock Mechanics and Rock Engineering,46(6): 1589-1602.
Guo P,Danish M,Du P,et al.2013.Viscoelastic and adhesive properties of polystyrene hydrogenated(3,4-polyisoprene and 1, 4-polyisoprene)-polystyrene and polymethy methacrylate polybuty acrylate polymethy methacrylate-based HMPSA. Journal of Adhesion Science and Technology,28(5): 1-17.
Hao Y, Hao H,Jiang G P,et al.2013.Experimental confirmation of some factors influencing dynamic concrete compressive strengths in high-speed impact tests. Cement and Concrete Research,52(8): 63-70.
Higgins W,Chakraborty T,Basu D.2012.A high strain-rate constitutive model for sand and its application in finite-element analysis of tunnels subjected to blast. International Journal for Numerical and Analytical Methods in Geomechanics,37(15): 2590-2610.
Hu X L, Luo W B,Liu X,et al.2013.Temperature and frequency dependent rheological behaviour of carbon black filled natural rubber. Plastics, Rubber and Composites,42(10): 416-420.
Liu J,Zhang H.2013.Experimental Study for dynamic mechanical properties of shale using split hop kinson pressure bar. Disaster Advances,6(11): 38-42.
Lu Y.2013.Dynamic compressive behavior of recycled aggregate concrete based on split Hopkinson pressure bar tests. Latin American Journal of Solids and Structures,11(1): 131-141.
Najim K B,Hall M R.2010.Crumb rubber aggregate coatings/pre-treatments and their effects on interfacial bonding, air entrapment and fracture toughness in self-compacting rubberised concrete(SCRC).Materials and Structures,46(12): 2029-2043.
Qin J,Chen R,Wen X,et al.2013.Mechanical behaviour of dual-phase high strength steel under high strain rate tensile loading. Materials Science and Engineering,586(1): 62-70.
Shukla S K,Maithani A,Srivastava D. 2014. Studies on the effect of concentration of formaldehyde on the synthesis of resoletype epoxidized phenolic resin from renewable resource material. Designed Monomers and Polymers,17(1): 69-77.
Song B,Antoun B R, Jin H.2010.Dynamic tensile characterization of a 4330-V steel with kolsky bar techniques. Experimental Mechanics,53(9): 1519-1529.
Woo S C,Kim J T,Cho C H,et al.2013.The dynamic compressive behavior of armor structural materials in split Hopkinson pressure bar test. The Journal of Strain Analysis for Engineering Design,48(7): 420-436.
Ye L,Gu G,Liu J,et al.2013.Influence of Ce addition on impact properties and microstructures of 2519A aluminum alloy. Materials Science and Engineering,582(8): 84-90.
Zou L C, Zhang Q. 2013.Experiment research on the dynamic mechanical behavior of aluminum matrix syntactic foam. Optoelectronics and Advanced Materials Rapid Communications,7(7/8): 577-579. |