欢迎访问林业科学,今天是

林业科学 ›› 2005, Vol. 41 ›› Issue (2): 201-203.doi: 10.11707/j.1001-7488.20050236

• 研究简报 • 上一篇    下一篇

白蚁诱饵剂成型工艺的研究

薛东 黄求应 王满囷 雷朝亮 胡松   

  1. 华中农业大学城市有害生物防治研究所,武汉430070
  • 收稿日期:2003-12-18 修回日期:1900-01-01 出版日期:2005-03-25 发布日期:2005-03-25

Research of Shaping Craft of the Termite Bait

Xue Dong,Huang Qiuying,Wang Manqun,Lei Chaoliang,Hu Song   

  1. Institute of Urban Pest Control, Huazhong Agriculture University Wuhan 430070
  • Received:2003-12-18 Revised:1900-01-01 Online:2005-03-25 Published:2005-03-25

关键词: 白蚁诱饵剂, 成型工艺, 裂纹度

Abstract:

The termite baits were maded by the handmade molding instrument,and the crackle degree of termite baits was regarded as the evaluation index. The shaping craft of the termite bait was studied by orthogonal method.The results of the experiment showed that the best shaping craft of the termite bait of the cane powder was:the thin cane powder,10% adhesive, 5 s of crush time and 200% water;while the best shaping craft of the termite bait of the pine fritter was:the thin pine fritter,10% adhesive,5 s of crush time and 100% water.

Key words: termite bait, shaping craft, crackle degree