欢迎访问林业科学,今天是

林业科学 ›› 2006, Vol. 42 ›› Issue (7): 83-86.doi: 10.11707/j.1001-7488.20060715

• 论文及研究报告 • 上一篇    下一篇

零距拉伸技术评价木材管胞纵向抗拉强度

余雁1 费本华2 张波2   

  1. 1.国际竹藤网络中心,北京100102;2.中国林业科学研究院木材工业研究所,北京100091
  • 收稿日期:2005-11-08 修回日期:1900-01-01 出版日期:2006-07-25 发布日期:2006-07-25

Estimation of Longitudinal Tensile Strength of Tracheids with Zero-Span Tension Technique

Yu Yan1,Fei Benhua2,Zhang Bo2   

  1. 1. International Center for Bamboo and Rattan Beijing 100102; 2. Research Institute of Wood Industry, CAF Beijing 100091
  • Received:2005-11-08 Revised:1900-01-01 Online:2006-07-25 Published:2006-07-25

摘要:

把造纸领域的零距拉伸技术引入木材科学研究领域,用于快速评价人工林杉木管胞纵向抗拉强度。结果表明:零距拉伸试样的最佳厚度是80μm,最适宜的夹持力为70psi;杉木管胞的纵向抗拉强度从髓心到树皮呈增大趋势,但在树高方向(1.3~7.3m)的差异不显著。利用零距拉伸技术具有测量迅速、可操作性强等特点,可以作为快速评价木材纤维纵向力学性能的新方法。

关键词: 零距拉伸, 木材管胞, 抗拉强度

Abstract:

The zero-span tension technique, used widely in papermaking industry, was introduced to wood science research in China, and used to estimate rapidly the longitudinal tensile strength of tracheids of Chinese Fir plantation wood. It was found optimum thickness of samples and clamping pressure for zero-span tension was 80 μm and 70 psi respectively. Statistical analyses indicated stable increase of tracheids tensile strength from bark to pith, while no significant variation was observed along tree height from 1.3 m to 7.3 m. Therefore, it was inferred that zero-span tension could be used as a novel and reliable method for assessing the axial tensile strength of softwood tracheids.

Key words: zero-span tensile test, wood tracheid, tensile strength