林业科学 ›› 2001, Vol. 37 ›› Issue (4): 142-144.doi: 10.11707/j.1001-7488.20010424
• 研究简报 • 上一篇
刘庆民 刘晓荣 陈亚军
收稿日期:
修回日期:
出版日期:
发布日期:
Liu Qingmin,Liu Xiaorong,Chen Yajun
Received:
Revised:
Online:
Published:
关键词: 锯齿齿形, CAD技术, NC指令, 数控加工
Abstract:
CAD system and NC-working on the sawteeth shape were disscussed.Automatic programming was realized by senior language in this system and by means of test,conclutsion was available satisfied.
Key words: Sawteeth shape, CAD technology, NC commands, NC-working
刘庆民 刘晓荣 陈亚军. 锯齿齿形CAD及数控加工[J]. 林业科学, 2001, 37(4): 142-144.
Liu Qingmin;Liu Xiaorong;Chen Yajun. CAD AND NC-WORKING ON THE SAWTEETH SHAPE[J]. Scientia Silvae Sinicae, 2001, 37(4): 142-144.
0 / / 推荐
导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks
链接本文: http://www.linyekexue.net/CN/10.11707/j.1001-7488.20010424
http://www.linyekexue.net/CN/Y2001/V37/I4/142