欢迎访问林业科学,今天是

林业科学 ›› 2001, Vol. 37 ›› Issue (2): 101-107.doi: 10.11707/j.1001-7488.20010216

• 论文及研究报告 • 上一篇    下一篇

金刚石涂层木工刀片磨损的研究

曹平祥 华毓坤 周之江   

  1. 南京林业大学,南京210037
  • 收稿日期:1999-03-15 修回日期:1900-01-01 出版日期:2001-03-25 发布日期:2001-03-25

WEAR OF DIAMOND COATED IN THE CONTINUOUSLY MACHINING PARTICLEBOARD

Cao Pingxiang,Hua Yukun,Zhou Zhijiang   

  1. Nanjing Forestry University Nanjing 210037
  • Received:1999-03-15 Revised:1900-01-01 Online:2001-03-25 Published:2001-03-25

摘要:

本文主要研究刀具材料、试验环境对金刚石涂层刀片耐磨性的影响,探讨刀片的耐磨性和耐腐蚀性。试验发现金刚石涂层提高了刀片耐磨性20%~45% ,金刚石薄膜均有不同程度的剥落,限制了涂层刀片的耐磨性。试验表明屑末溶液和醋酸、盐酸混合溶液不腐蚀金刚石薄膜,但腐蚀基体材料。金刚石薄膜磨耗机理是“磨损变形—裂纹—磨屑形成”。高速钢刀片以磨料磨损为主,腐蚀磨损为辅。粘结剂(钴元素)丧失是硬质合金刀片磨损的根本原因,一旦残余粘结力不足以抵抗磨擦所产生的剪切力,碳化钨颗粒就会因疲劳而脱落。

关键词: 金刚石薄膜, 刀具材料, 磨损, 碳化物, 磨料磨损, 腐蚀磨损

Abstract:

The study was to investigate the effects of tool materials and experimental surroundings on diamond coated tool wear. It was expressed that diamond coated tools decreased tool wear with 25~45 percent, but diamond membrane was to some extent peeled off, hindering diamond coated tool from improving tool life with much higher extent. It was realized from the worn edge of tools that both chip solution and the mixed solution of hydrochloric acid and acetic acid did not corrode the diamond membrane, however etched the matrix composition. It might be convinced that the wear of diamond membrane resulted from "plastic deformation-crackle-particle peeling". The abrasive mechanism was mainly responsible for the tool wear of high speed steel in additional to the corrosion mechanism. The binder of cemented tungsten carbides was etched by chemical corrosion. In case the residual forces were not enough to hold the carbides, the carbides would disappear for abrading fatigue.

Key words: Diamond membrane, Tool materials, Wear, Carbides, Abrasion, Corrosive wear