圆锯片最佳辊压适张度处理位置的分析

doi:10.11707/j.1001-7488.20010213

林业科学 ›› 2001, Vol. 37 ›› Issue (2): 84-89.doi: 10.11707/j.1001-7488.20010213

圆锯片最佳辊压适张度处理位置的分析

母德强陈塑寰

吉林工业大学力学系,长春130025

收稿日期:2000-09-13 修回日期:1900-01-01 出版日期:2001-03-25 发布日期:2001-03-25

ANALYSIS OF OPTIMUM POSITION OF ROLL TENSIONING ON THE CIRCULAR SAW BLADE

Mu Deqiang,Chen Suhuan

Department of Mechanics, Jilin University of Technology Changchun130025

Received:2000-09-13 Revised:1900-01-01 Online:2001-03-25 Published:2001-03-25

摘要/Abstract

摘要：

利用非线性理论和矩阵摄动理论,研究了离心力场、切削温度场及辊压适张度位置对圆锯片动态特性和临界转速的影响;对离心力场,切削温度场共同作用下的锯片最佳辊压适张度处理位置进行了计算分析;还分析了锯夹半径对最佳辊压位置的影响。

关键词: 圆锯片, 辊压适张度处理, 临界转速

Abstract:

In this paper, the effect of the centrifugal force cutting temperature stresses and the position of roll tensioning on the dynamic behavior and the critical speed of the circular saw blade is researched with the nonlinear and the matrix perturbation theories. The optimum position of roll tensioning is analyzed under the action of the centrifugal force and cutting temperature stresses. The effect of tamped radius on the optimum position is also analyzed.

Key words: Circular saw blade, Roll tensioning treatment, Critical speed

母德强陈塑寰. 圆锯片最佳辊压适张度处理位置的分析[J]. 林业科学, 2001, 37(2): 84-89.

Mu Deqiang;Chen Suhuan. ANALYSIS OF OPTIMUM POSITION OF ROLL TENSIONING ON THE CIRCULAR SAW BLADE[J]. Scientia Silvae Sinicae, 2001, 37(2): 84-89.

圆锯片最佳辊压适张度处理位置的分析

ANALYSIS OF OPTIMUM POSITION OF ROLL TENSIONING ON THE CIRCULAR SAW BLADE

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价

作者中心

期刊获奖

引证指标

联系方式