欢迎访问林业科学,今天是

林业科学 ›› 2026, Vol. 62 ›› Issue (11): 177-186.doi: 10.11707/j.1001-7488.LYKX20260145

• 研究论文 • 上一篇    

基于振动采收的油茶果脱落力与运动响应特性

李庆松,姚小康,徐道春*(),何源,马跃威,白效鹏,李文彬   

  1. 北京林业大学工学院 林业装备与自动化国家林业和草原局重点实验室 北京100083
  • 收稿日期:2026-03-13 修回日期:2026-05-18 出版日期:2026-11-10 发布日期:2026-11-20
  • 通讯作者: 徐道春 E-mail:xudaochun@bjfu.edu.cn
  • 基金资助:
    国家重点研发计划项目(2019YFD1002401);国家自然科学基金项目(52206229)

Detachment Force and Motion Response Characteristics of Camellia oleifera Fruits in Vibration Harvesting

Qingsong Li,Xiaokang Yao,Daochun Xu*(),Yuan He,Yuewei Ma,Xiaopeng Bai,Wenbin Li   

  1. School of Technology, Beijing Forestry University Key Laboratory of National Forestry and Grassland Administration on Forestry Equipment and Automation Beijing 100083
  • Received:2026-03-13 Revised:2026-05-18 Online:2026-11-10 Published:2026-11-20
  • Contact: Daochun Xu E-mail:xudaochun@bjfu.edu.cn

摘要:

目的: 揭示油茶果振动采收过程中的脱落力特性与运动响应规律,为振动采收装备设计和作业参数优化提供理论依据。方法: 首先,根据油茶果实结构特征,将果实?枝条系统简化为单摆动力学模型,推导受迫振动下的运动方程,明确果实惯性力的理论表达式。其次,以‘长林53号’油茶果为研究对象,采用力学试验机和力矩测量仪测量果实的静态拉伸分离力、折弯分离力和扭断力,并通过侧枝摇振式油茶采摘机开展田间振动试验,结合高速摄像系统与Tracker软件获取不同振幅与频率组合下果实的惯性力、惯性脱落力、运动幅值、运动轨迹及脱落时间,分析果实质量对脱落加速度的影响。结果: 理论分析结果表明,果实所受惯性力与频率的平方和振幅的一次方呈正比。静态力学测试结果显示,油茶果拉伸分离力范围为13.12~22.15 N,均值为17.54±1.73 N;折弯分离力范围为5.07~15.75 N,均值为8.63±2.07 N,扭断分离力矩范围为0.019~0.052 N·m,均值为0.034±0.009 N·m,拉伸分离力显著高于折弯分离力。田间振动试验结果表明,果实惯性力随频率升高呈二次曲线增长趋势,随振幅增大呈线性增长趋势,与理论分析结果一致。果实惯性脱落力分布在9.16~13.91 N之间,均位于折弯分离力范围内,证实振动采收过程中果实主要发生折弯分离。果实运动响应以水平方向为主,合位移随振幅增大而增加,随频率升高先增后减;果实的运动轨迹随频率升高依次呈直线形、椭圆形、“8”字形和无序形,复杂轨迹有利于加速果柄疲劳断裂。果实脱落时间随振动强度增加先缩短后趋于稳定,且存在明显的能量输入阈值;果实质量越大,所需脱落加速度越低。结论: 油茶果振动采收的适宜参数组合为振幅50~60 mm、频率8~10 Hz,作业时间为15 s。本研究揭示振动参数对果实受力与运动的影响机制,明确果实以折弯分离为主的脱落模式以及果实质量对脱落加速度的调控作用,为油茶振动采收装备设计和作业参数优化提供了理论依据。

关键词: 油茶果, 振动采收, 脱落力, 运动响应, 参数优化

Abstract:

Objective: This study aims to reveal the detachment force characteristics and motion response patterns of Camellia oleifera fruits during vibration harvesting, providing a theoretical basis for the design of vibration harvesting equipment and the optimization of operational parameters. Method: Firstly, based on the structural characteristics of C. oleifera fruit, the fruit-branch system was simplified into a single-pendulum dynamic model. The equations of motion under forced vibration were derived to clarify the theoretical expression of the fruit’s inertial force. Secondly, C. oleifera Changlin 53 fruits were used as the research object, and a mechanical testing machine and a torque meter were employed to measure the static tensile separation, bending separation and torsional breaking force of the fruit. Field vibration tests were conducted using side-branch shaking C. oleifera harvester. A high-speed camera system combined with Tracker software was used to obtain the fruit’s inertial force, inertial detachment force, motion amplitude, motion trajectory, and detachment time under different combinations of amplitude and frequency. The influence of fruit mass on detachment acceleration was also analyzed. Result: Theoretical analysis indicated that the inertial force acting on the fruit was proportional to the square of the frequency and the first power of the amplitude. Static mechanical test results showed that the tensile separation force of C. oleifera fruit ranged from 13.12 to 22.15 N, with a mean of 17.54±1.73 N, the bending separation force ranged from 5.07 to 15.75 N, with a mean of 8.63±2.07 N, and the torsional breaking force ranged from 0.019 to 0.052 N·m, with a mean of 0.034±0.009 N·m. The tensile separation force was significantly higher than the bending separation force. Field vibration test results showed that the fruit inertial force exhibited a quadratic increase with increasing frequency and a linear increase with increasing amplitude, which was consistent with the theoretical analysis. The inertial detachment force of the fruit ranged from 9.16 to 13.91 N, all falling within the range of the bending separation force, confirming that fruit detachment during vibration harvesting primarily occurs through bending separation. The motion response of the fruit was predominantly in the horizontal direction. The total displacement increased with increasing amplitude, while it first increased and then decreased with increasing frequency. As frequency increased, the motion trajectory of the fruit sequentially presented linear, elliptic, “8”-shaped, and disordered patterns. Complex trajectories were beneficial for accelerating the fatigue fracture of the fruit stalk. Fruit detachment time initially decreased and then stabilized with increasing vibration intensity, and there was a clear energy input threshold. The larger fruit mass, the lower the required detachment acceleration. Conclusion: The optimal parameter combination for vibration harvesting of C. oleifera fruits is an amplitude of 50?60 mm, a frequency of 8?10 Hz, and an operation time of 15 s. This study reveals the influence mechanism of vibration parameters on fruit stress and motion, clarifies that fruit detachment primarily occurs through bending separation, and clarifies the regulatory role of fruit mass in shedding acceleration. It provides a theoretical basis and data support for the design of vibration harvesting devices for C. oleifera fruit and the optimization of their operational parameters.

Key words: Camellia oleifera fruit, vibration harvesting, detachment force, motion response, parameter optimization

中图分类号: