欢迎访问林业科学,今天是

林业科学 ›› 2026, Vol. 62 ›› Issue (11): 153-164.doi: 10.11707/j.1001-7488.LYKX20260173

• 研究论文 • 上一篇    

木材防腐可处理性分级评价

姜珲,张景朋,李洁雯,邵闯,马星霞*()   

  1. 中国林业科学研究院木材工业研究所 北京 100091
  • 收稿日期:2026-03-26 修回日期:2026-06-25 出版日期:2026-11-10 发布日期:2026-11-20
  • 通讯作者: 马星霞 E-mail:mxxyln@139.com
  • 基金资助:
    国家重点研发计划“南方储备林高效培育与绿色先进制造集成示范”项目“南方储备林木材化学和仿生矿化改性技术集成示范”课题(2024YFD2201203);中央公益性科研院所基金平台项目“木质材料功能化处理与评价”(CAFYBB2023PA004)。

Classification Evaluation of Wood Preservation Treatability

Hui Jiang,Jingpeng Zhang,Jiewen Li,Chuang Shao,Xingxia Ma*()   

  1. Research Institute of Wood Industry, Chinese Academy of Forestry Beijing 100091
  • Received:2026-03-26 Revised:2026-06-25 Online:2026-11-10 Published:2026-11-20
  • Contact: Xingxia Ma E-mail:mxxyln@139.com

摘要:

目的: 以部分国产树种心材为研究对象,通过实验室和工厂浸渍处理,建立木材防腐可处理性实验室评价体系,并探讨其与木材显微构造的内在关联,为木材防腐处理工艺优化与树种合理利用提供基础数据支持。方法: 选取杉木、辐射松及若干阔叶材树种共12种木材心材,采用实验室真空?常压浸渍法,以硫酸铜溶液为示踪剂,设置不同真空与常压时间组合,比较不同处理条件下的药剂渗透深度和载药量差异,筛选最优试验流程和分级标准;进一步结合工业化加压浸渍处理对分级结果进行验证,并利用压汞法(MIP)分析不同等级木材的孔隙结构特征。结果: 1) 不同真空?常压时间组合条件下,各树种心材药剂渗透深度和载药量差异明显,其中“30 min真空+30 min常压”条件下渗透结果稳定且树种间区分度最高,可作为实验室评价的优选工艺参数。2) 基于优选工艺,各树种平均横向渗透深度呈现由>2.0 mm至接近于零的梯度分布。通过多重比较,各树种可划分为若干显著性差异组,其分布特征与渗透深度变化趋势一致,并在 2.0和 0.5 mm 附近形成分界,在1.5 mm 附近表现为过渡区,体现出防腐可处理性的分级特征。3) 经工业化加压浸渍处理,各树种的渗透表现与实验室分级结果总体一致,证明所建立的实验室评价体系具有良好可靠性和工业适用性。4) 孔隙结构分析表明,不同可处理性等级在平均孔径和孔径分布特征上存在显著差异,其中阔叶材平均孔径与渗透深度呈显著正相关关系(R2=0.85)。显微观察结果显示,不同木材类型在细胞结构组成和内含物分布上存在差异,这些特征可能影响防腐剂渗透路径的形成。结论: 本研究建立木材防腐可处理性的实验室评价方法和分级体系,基于渗透深度的分布特征,可将防腐可处理性划分为4个等级:1 级(渗透深度 ≥ 2.0 mm)、2 级(1.5~2.0 mm)、3 级(0.5~1.5 mm)和 4 级(< 0.5 mm)。木材防腐可处理性等级与其内部孔隙结构密切相关,其中平均孔径与渗透深度呈显著正相关关系,是影响阔叶材液体渗透性能的关键微观结构参数。

关键词: 木材防腐, 防腐可处理性, 实验室评价, 分级, 孔隙结构

Abstract:

Objective: With the heartwood of some domestic tree species as the research object, a laboratory evaluation system for wood preservative treatability was established through laboratory and industrial impregnation treatments, and its intrinsic relationship with wood microstructure was explored, aiming to provide fundamental data for optimizing wood preservative treatment processes and promoting the rational utilization of wood resources. Method: Heartwood samples from 12 wood species, including Cunninghamia lanceolata, Pinus radiata, and several hardwood species, were selected. A laboratory vacuum–atmospheric pressure impregnation method was employed with copper sulfate solution as a tracer. Diverse combinations of vacuum and atmospheric pressure durations were designed to compare differences in penetration depth and chemical uptake under various treatment conditions, with the aiming to identify the optimal experimental procedure and classification criteria. Furthermore, the laboratory classification results were verified through industrial pressure impregnation treatment. Mercury intrusion porosimetry (MIP) was used to analyze pore structure characteristics of wood with different treatability levels. Result: 1) Under different combinations of vacuum-atmospheric pressure duration, there were significant differences in penetration depth and chemical uptake of heartwood among different tree species. Among them, the condition of “30 min vacuum + 30 min atmospheric pressure” yielded stable results and the highest discriminatory power among different species, which can be used as the preferred process parameters for laboratory evaluation. 2) Based on the optimal process, the average transverse penetration depth of different species exhibited a gradient distribution ranging from >2.0 mm to nearly zero. Multiple comparison analysis divided the species into several statistically distinct groups, consistent with the variation trend of penetration depth. Thresholds were identified around 2.0 mm and 0.5 mm, with approximately 1.5 mm representing a transition zone, reflecting the grading characteristics of preservative treatability. 3) Results from industrial pressure impregnation treatment were generally consistent with the laboratory classification, demonstrating the reliability and practical applicability of the established evaluation system. 4) Pore structure analysis revealed that there were significant differences in average pore diameter and pore size distribution among different treatability classes. A significant positive correlation was found between average pore diameter and penetration depth in hardwood species (R2=0.85). Microscopic observation results showed that different types of wood had differences in cell structure composition and inclusion distribution, which may affect the formation of preservative penetration pathways. Conclusion: This study establishes a laboratory evaluation method and classification system for wood preservative treatability. Based on the distribution characteristics of penetration depth, preservative treatability can be classified into four levels: grade 1 (penetration depth ≥2.0 mm), grade 2 (1.5–2.0 mm), grade 3 (0.5–1.5 mm), and grade 4 (<0.5 mm). Wood preservative treatability is closely related to its internal pore structure, with a significant positive correlation between average pore diameter and penetration depth. Average pore diameter is identified as a key microstructural parameter influencing liquid permeability in hardwoods.

Key words: wood preservation, preservative treatability, laboratory evaluation, grade, pore structure

中图分类号: