索道摄动法计算的精度分析

›› 1992, Vol. 28 ›› Issue (6): 517-523.

索道摄动法计算的精度分析

罗桂生

福建林学院

收稿日期:1991-07-08 修回日期:1900-01-01 出版日期:1992-11-25 发布日期:1992-11-25

A ANALYSIS ON THE PRECISION FOR PERTURBATIONAL ALGORITHM OF A CABLEWAY

Luo Guisheng

Fujian College of Forestry

Received:1991-07-08 Revised:1900-01-01 Online:1992-11-25 Published:1992-11-25

摘要/Abstract

摘要： 论证摄动法三次解挠度的最大误差在下支点附近,给出最大挠度误差和水平张力误差的计算公式,据此论述索道摄动法算法的精度。此外,还分别给出了三次解和一次解的挠度绝对误差公式,便于生产中作高程控制。

关键词: 索道, 摄动法, 挠度最大误差, 挠度绝对误差, 精度分析

Abstract: In this paper, the author demonstrates that the maximale erroe of deflection for cubic solution of perturbational algorithm is near the lower fulcrum. This paper puts the formula of calulate the maximale erroe of a deflection and the erroe of level tension. Based on the above work, the discussion was made of the precision for perturbational algorithm of a cableway. And, besides, this paper puts the formulas of calulate the absolute erroe of a detection for once and cubic solution of perturbational algorithm, so that the height is under control in the production.

Key words: Cableway, Perturbational algorithm, Maximale erroe of a deflection, Absolute erroe of a delection, Analysis of the precision

罗桂生. 索道摄动法计算的精度分析[J]. , 1992, 28(6): 517-523.

Luo Guisheng. A ANALYSIS ON THE PRECISION FOR PERTURBATIONAL ALGORITHM OF A CABLEWAY[J]. , 1992, 28(6): 517-523.

[1]	冯辉荣;周新年;李闽晖;杨开兴;王勃;巫志龙;王小桃. 轻型索道集材与开路集材三大效益对比分析[J]. 林业科学, 2012, 48(8): 129-134.
[2]	罗才英;冯建祥. 人工林间伐集材索道研究[J]. 林业科学, 2011, 47(11): 154-159.
[3]	周新年<sup></sup>巫志龙<sup></sup>官印生<sup></sup>张正雄<sup></sup>郑丽凤<sup></sup>陈裕云<sup></sup>冯建祥<sup></sup>. 移动式承载索应用于特大桥吊装工程的设计[J]. 林业科学, 2010, 46(6): 107-112.
[4]	周新年官印生张正雄巫志龙郑丽凤李纲苏鑫加冯建祥. 武当山特殊吊装索道设计研究[J]. 林业科学, 2007, 43(03): 108-112.
[5]	周新年张正雄郑丽凤罗仙仙王勇. 林业索道在山区水利吊装工程上的应用[J]. 林业科学, 2003, 39(2): 140-144.
[6]	刘巧伶张义民. 林业机械驱动桥壳的可靠性设计[J]. , 1999, 35(4): 125-128.
[7]	周新年蔡志伟. 无荷悬索计算精度与悬空条件的研究[J]. , 1993, 29(4): 350-354.
[8]	周新年. 林业索道设计系统[J]. , 1992, 28(1): 47-51.
[9]	周新年. 林业索道承载索的优化设计[J]. , 1989, 25(2): 127-132.