以竹代塑加工技术与产品现状及其市场发展潜力

doi:10.11707/j.1001-7488.LYKX20230140

Abstract

Abstract:

China has a wealth of bamboo resources, cutting-edge bamboo processing technologies, strong research and development capabilities, and strong international competitiveness. The bamboo industry is a green and promising sector of the Chinese economy that contributes significantly to the advancement of both economic growth and environmental protection. The conventional plastics sector is currently confronted with issues such a heavy reliance on non-renewable resources, excessive energy consumption, and significant environmental damage. Governments and groups around the world have introduced a number of “plastic ban” policies and initiatives to promote sustainable plastic alternatives in response to the expansion of the global economy and people’s rising concern for environmental protection. Bamboo presents a range of opportunities and options for the development of bamboo-based plastic substitutes because it is an eco-friendly, low-carbon, renewable, and degradable bio-based material with a variety of processing units, excellent material properties, and great processing selectivity and product designability. Bamboo-based plastic substitutes have steadily garnered regulatory, commercial, and consumer favor as an eco-friendly replacement. The Bamboo as a Substitute for Plastic Initiative was introduced in November 2022 by the Chinese government and the International Bamboo and Rattan Organization in an effort to reduce plastic pollution, combat climate change, and quicken the implementation of the UN 2030 Sustainable Development Agenda. In November 2023, 《The Global Action Plan for Bamboo as a Substitute for Plastic (2023—2030)》 was officially released. With the Bamboo as a Substitute for Plastic Initiative, China has made it clear that it is committed to protecting the environment, and various decision-making levels have been used to strongly encourage the development of the bamboo industry. This article analyzes the urgent need for and viability of alternative bamboo to plastic solutions based on the benefits of China’s bamboo resources and bamboo industry as well as the traditional plastic industry’s need for a green transformation. This paper focuses on the current state of typical key industry products like automotive parts, electric appliance shells, cooling tower tower packings, pipes and tubes, building decoration materials, and disposable tableware and their potential for bamboo as a substitute for plastic. Furthermore, the study proposes actionable recommendations, development trends, and future prospects for the adoption of bamboo as a substitute for plastic. This research seeks to provide some reference for the promotion and deployment of bamboo-based plastic alternative technologies and goods in China.

Key words: bamboo as a substitute for plastic, plastic ban, processing technology, key industries, market analysis, action proposal

CLC Number:

Hanzhou Ye,Jinhe Fu,Haitao Cheng,Fuming Chen,Shuyan Yang,Ge Wang. The Current Status and Market Development Potential of Processing Technology and Products Using Bamboo as a Substitute for Plastic[J]. Scientia Silvae Sinicae, 2024, 60(1): 129-141.

Figures/Tables 10

Table 1

Property characteristics of different bamboo units and their corresponding bamboo-based plastic substitute products"

竹单元 Bamboo units	竹材特性 Property characteristics	塑料产品 Plastic products	产品性能需求 Product performance requirements	以竹代塑产品 Bamboo-based plastic substitute products
竹片、竹条 Bamboo slice, bamboo strip	纵向拉伸强度高、柔韧性好 High longitudinal tensile strength and good flexibility	塑料淋水填料、塑料竹筋格栅、栅栏等 Plastic watering filler, plastic bamboo grille, fence, etc.	力学强度较高、柔韧性好、耐久、耐高低温 Mechanically robust, highly flexible, durable, and resistant to extreme temperatures	冷却塔淋水填料、土工格栅、栅栏等 Cooling tower watering filler, geogrid, fence, etc.
竹束、微薄竹、精刨竹条 Bamboo bundle, fine bamboo veneer, fine planed bamboo strip	表面致密、硬度大、耐磨损，色泽清爽、纹理自然、易于设计 Dense surface with high hardness and abrasion resistance Fresh color, natural texture, easy to design	电子电器产品的塑料壳体 Plastic shells for electronic and electrical products 塑料墙板、装饰装修材料等塑料建材等 Plastic wall panels, decorative materials, and other plastic building materials	耐磨损、耐久、触感舒适、审美装饰性、无毒害 Durable, long-lasting, providing a comfortable tactile experience, aesthetically decorative, and non-toxic	产品内/外壳体、包装 Product inner/outer shell and packaging 建筑围护、装饰装修产品等 Building envelope, decoration products, etc.
竹篾 Bamboo sliver	拉伸强度高、韧性好 High tensile strength and good toughness	大径塑料管道、管廊 Large diameter plastic pipes and pipe racks	适应不同曲率弯曲且力学强度较高、健康环保、满足多种产品形状需求 Adapt to different curvature bending and high mechanical strength, health and environmental protection, to meet the needs of a variety of product shapes	竹缠绕管道、管廊等 Bamboo wrapped pipes, pipe galleries, etc
连续竹纤维 Continuous bamboo fiber	成本低、结构可设计 Low cost and designable structure	风管、水管等小径塑料管 Small diameter plastic pipes/tubes such as air ducts and water pipes/tubes		由连续竹纤维缠绕制成的风管、水管等输送管道 Air ducts and water pipes made by winding bamboo fiber yarn
竹长纤维 Bamboo long fiber	轻质均匀、交织性能好、易成型 Lightweight and uniform, with good interweaving performance and easy molding	高铁、汽车等交通运输工具的塑料内饰件等 Plastic interior components for high-speed rail, automobiles and other transportation vehicles 塑料建筑墙板、装饰材等 Plastic building wall panels and decorative materials	绿色低碳、轻量化、健康环保、保温吸音 Green low-carbon, lightweight, health and environmental protection, thermal insulation and sound absorption	以竹纤维毡为主要原料的汽车、高铁、游艇等交通运输用异型内饰件 Automotive, high-speed rail, yacht and other transportation interior parts with irregular shapes made mainly of residential fiber felt 墙板、建筑装饰材 Bamboo fiber based wall panels and building decorative materials
竹短纤维 Bamboo short fiber	竹纤维拉伸强度高，竹纤维长细比大、易交织成型 High tensile strength of bamboo fiber, large bamboo fiber length to thickness ratio, and easy to interweave molding	一次性塑料餐盒、餐盘、杯、碗等一次性塑料制品 Disposable plastic products such as disposable plastic lunch boxes, dinner plates, cups, bowls, etc. 塑料托盘、塑料包装等 Plastic pallets, plastic packaging, etc.	强度适宜、耐渗透、环保可降解、成本低、生产效率高 Optimal strength, permeation resistance, environmentally friendly and degradable, low cost, and high production efficiency	一次性竹纤维餐具、托盘、工业品包装等竹纤维异型模塑产品 Disposable bamboo fiber tableware, trays, industrial packaging and other bamboo fiber shaped molded products

Table 1

Fig.1

Fig.2

Fig.3

Table 2

Table 3

National policies related to the bamboo industry in China from 2011"

年份Year	部门/机构Departments/Agencies	政策 Policies
2011	国家林业局 State Forestry Administration	《林业发展“十二五”规划》 The 12th Five Year Plan for Forestry Development
2013	国家林业局 State Forestry Administration	《全国竹产业发展规划（2013—2020年）》 National Bamboo Industry Development Plan (2013-2020)
2016	国家林业局 State Forestry Administration	《林业发展“十三五”规划》 The 13th Five Year Plan for Forestry Development
2017	国家林业局、国家发展和改革委员会、科技部等十一部委 Eleven ministries and commissions including State Forestry Administration, National Development and Reform Commission, and Ministry of Science and Technology	《林业产业发展“十三五”规划》 The 13th Five Year Plan for the Development of Forestry Industry
2021	国家林业和草原局、国家发展和改革委员会、科技部等十部委 Ten ministries and commissions, including National Forestry and Grassland Administration, National Development and Reform Commission, and Ministry of Science and Technology	《关于加快推进竹产业创新发展的意见》 Opinions on Accelerating the Innovative Development of Bamboo Industry
2021	国家林业和草原局、国家发展和改革委员会 National Forestry and Grassland Administration and National Development and Reform Commission	《“十四五”林业草原保护发展规划纲要》 Outline of the "14th Five Year Plan" for the Protection and Development of Forestry and Grassland
2022	国家林业和草原局 National Forestry and Grassland Administration	《林草产业发展规划（2021—2025年）》 Development Plan for Forest and Grass Industry (2021—2025)
2022	中国竹产业协会 China Bamboo Industry Association	《全国竹产业发展规划（2021—2030年）》 National Bamboo Industry Development Plan (2021—2030)
2023	国家发展和改革委员会、工业和信息化部、财政部、国家林业和草原局 National Development and Reform Commission, Ministry of Industry and Information Technology, Ministry of Finance, and National Forestry and Grassland Administration	《加快“以竹代塑”发展三年行动计划》 Three-year Action Plan to Accelerate the Development of Bamboo as a Substitute for Plastic

Table 3

Fig.4

Fig.5

Fig.6

Fig.7

References 0

	曹双平, 王　戈, 余　雁, 等. 几种植物单根纤维力学性能对比. 南京林业大学学报(自然科学版), 2010, 34 (5): 87- 90.
	Cao S P, Wang G, Yu Y, et al. Comparison of mechanical properties of different single vegetable fibers. Journal of Nanjing Forestry University (Natural Sciences Edition), 2010, 34 (5): 87- 90.
	常　敏. 近年全球ABS供需分析及预测. 世界石油工业, 2022, 29 (5): 61- 67.
	Chang M. Analysis and forecast of global ABS supply and demand. World Petroleum Industry, 2022, 29 (5): 61- 67.
	陈季荷, 顾少华, 李明鹏, 等. 竹纤维增强聚合物基复合材料性能及应用. 世界竹藤通讯, 2022, 20 (4): 18- 23.
	Chen J H, Gu S H, Li M P, et al. Properties and applications of bamboo fiber reinforced polymer matrix composites. World Bamboo and Rattan, 2022, 20 (4): 18- 23.
	陈礼生, 费本华, 方长华, 等. 火力发电厂竹材与塑料淋水填料的比较研究. 林产工业, 2018, 45 (5): 10- 14.
	Chen L S, Fei B H, Fang C H, et al. Comparative study on bamboo and plastic packing for thermal power plant. China Forest Products Industry, 2018, 45 (5): 10- 14.
	陈晓怡, 王　戈, 陈复明, 等. 一次性竹纤维餐盒研究现状与发展方向. 世界竹藤通讯, 2022, 20 (1): 6- 12.
	Chen X Y, Wang G, Chen F M, et al. Disposable bamboo fiber dishware: research state and development prospect. World Bamboo and Rattan, 2022, 20 (1): 6- 12.
	陈友良, 石永锋, 谢大幸. 竹格填料与PVC薄膜填料的性能对比及应用. 电站辅机, 2016, 37 (1): 37- 41.
	Chen Y L, Shi Y F, Xie D X. Performance comparison between bamboo grid packing and PVC film packing and its applications. Power Station Auxiliary Equipment, 2016, 37 (1): 37- 41.
	程海涛, 苑之童, 李明鹏, 等. 聚氨酯夹层结构聚丙烯/竹纤维汽车内饰构件制备与评价. 工程塑料应用, 2022, 50 (9): 45- 50.
	Cheng H T, Yuan Z T, Li M P, et al. Preparation and evaluation of polypropylene/bamboo fiber automotive interior components with polyurethane sandwich structure. Engineering Plastics Application, 2022, 50 (9): 45- 50.
	戴武军, 谭益民, 谢奕辉. 以竹代塑、以竹治污系列竹类新产品的开发. 世界竹藤通讯, 2021, 19 (2): 10- 14.
	Dai W J, Tan Y M, Xie Y H. New bamboo-based products development for plastic replacement and pollution control with bamboo. World Bamboo and Rattan, 2021, 19 (2): 10- 14.
	费本华, 苏　勤, 刘焕荣, 等. 竹缠绕技术研究进展. 林业工程学报, 2022, 7 (6): 25- 33.
	Fei B H, Su Q, Liu H R, et al. Research progress of bamboo winding technology. Journal of Forestry Engineering, 2022, 7 (6): 25- 33.
	费世民. 竹产品全生命周期碳足迹研究进展及其测定框架. 四川林业科技, 2021, 42 (6): 1- 10.
	Fei S M. Research progress and measurement framework on the lifecycle carbon footprint of bamboo products. Journal of Sichuan Forestry Science and Technology, 2021, 42 (6): 1- 10.
	冯鹏飞, 李玉敏. 2021年中国竹资源报告. 世界竹藤通讯, 2023, 21 (2): 100- 103.
	Feng P F, Li Y M. China’s bamboo resources in 2021. World Bamboo and Rattan, 2023, 21 (2): 100- 103.
	傅大伟, 官凤英. 埃塞俄比亚竹业发展及与中国合作展望. 世界林业研究, 2022, 35 (5): 95- 100.
	Fu D W, Guan F Y. Bamboo industry development in Ethiopia and Sino-Ethiopian bamboo cooperation outlook. World Forestry Research, 2022, 35 (5): 95- 100.
	傅金和. “以竹代塑”, 减塑降碳, 绿色发展. 生态文明世界, 2023, (1): 18- 25.
	Fu J H. Reducing plastic and carbon emissions to promote green development. Ecological Civilization World, 2023, (1): 18- 25.
	高　璜, 程　平, 彭九生. 毛竹林低碳经营技术问题探析. 南方林业科学, 2015, 43 (5): 34- 36.
	Gao H, Cheng P, Peng J S. Analysis of the low-carbon management technology of Phyllostachys pubescens forests. South China Forestry Science, 2015, 43 (5): 34- 36.
	工业和信息化部消费品工业司, 中国家用电器研究院, 全国家用电器工业信息中心. 中国家用电器行业品牌发展报告(2021—2022年度). 家用电器, 2023, 555 (1): 26- 43.
	Department of Consumer Goods Industry, Ministry of Industry and Information Technology, China Household Electric Appliance Research Institute, National Home Appliances Industry Information Center. Brand development report of China’s home appliances industry (2021—2022). Household Appliances, 2023, 555 (1): 26- 43.
	黄　河, 罗正东, 李检保, 等. 竹筋格栅套筒加筋碎石桩承载力分析. 人民长江, 2022, 53 (6): 193- 197.
	Huang H, Luo Z D, Li J B, et al. Analysis on bearing capacity of stone columns reinforced with bamboo geogrid sleeve. Yangtze River, 2022, 53 (6): 193- 197.
	辉朝茂, 杨宇明. 2002. 中国竹子培育和利用手册. 北京: 中国林业出版社.
	Hui C M, Yang Y M. 2002. A hand-book of bamboo cultivation and utilization in China. Beijing: China Forestry Publishing House. ［in Chinese］
	江泽慧, 叶　柃, 费本华. 竹缠绕复合材料的研发、应用及产业化现状与前景. 世界竹藤通讯, 2020, 18 (2): 1- 11.
	Jiang Z H, Ye L, Fei B H. Development, application and industrialization of bamboo winding composites: status and prospect. World Bamboo and Rattan, 2020, 18 (2): 1- 11.
	江泽慧. 竹材解剖学研究进展. 世界林业研究, 2020, 33 (3): 1- 6.
	Jiang Z H. Research advances in bamboo anatomy. World Forestry Research, 2020, 33 (3): 1- 6.
	李依然, 傅金和. 全球禁塑政策与竹产业发展机遇. 世界竹藤通讯, 2021, 19 (4): 1- 7.
	Li Y R, Fu J H. Global plastic ban policy and development opportunities of bamboo industry. World Bamboo and Rattan, 2021, 19 (4): 1- 7.
	刘贤淼, 冉东亚. 中国竹藤标准体系构建的思考. 世界竹藤通讯, 2022a, 20 (3): 5- 9.
	Liu X M, Ran D Y. Thoughts on the development of bamboo and rattan standard system in China. World Bamboo and Rattan, 2022a, 20 (3): 5- 9.
	刘贤淼, 冉东亚. 加强标准化工作引领竹产业高质量发展. 世界竹藤通讯, 2022b, 20 (2): 1- 5.
	Liu X M, Ran D Y. Strengthening standard development for high-quality development of bamboo industry. World Bamboo and Rattan, 2022b, 20 (2): 1- 5.
	刘　秀, 丁志新, 刘　洋, 等. 全球及中国竹产业专利分析研究. 世界竹藤通讯, 2018, 16 (4): 24- 31. doi: 10.13640/j.cnki.wbr.2018.04.006
	Liu X, Ding Z X, Liu Y, et al. A study on patents analysis of global and China’s bamboo industry. World Bamboo and Rattan, 2018, 16 (4): 24- 31. doi: 10.13640/j.cnki.wbr.2018.04.006
	陆晓如. 塑料已经成为国家的“超级垃圾”. 中国石油石化, 2021, 457 (2): 11.
	Lu X R. Plastic has become the country's "super waste". Chinese Petrochemistry, 2021, 457 (2): 11.
	宁　凯, 杨振京, 毕志伟, 等. 微塑料——地球表层的人造“瘴气”. 自然资源科普与文化, 2022, (4): 24- 27.
	Ning K, Yang Z J, Bi Z W, et al. Microplastics: man-made "miasma" on the earth's surface. Scientific and Cultural Popularization of Natural Resources, 2022, (4): 24- 27.
	石鎏杰, 朱佳欢, 施　均, 等. 可降解塑料产品的分类与标识的现状与展望. 塑料助剂, 2021, (3): 1- 5.
	Shi L J, Zhu J H, Shi J, et al. Classification and identification of degradable plastic products: current situation and prospect. Plastic Additives, 2021, (3): 1- 5.
	汤　磊, 许安拓. 对一次性塑料制品征收消费税的探讨. 税务研究, 2022, (8): 34- 38.
	Tang L, Xu A T. A discussion on consumption taxation on disposable plastic products. Taxation Research, 2022, (8): 34- 38.
	陶　怡, 柯　彦, 李俊彪, 等. 我国生物可降解塑料产业发展现状与展望. 化工新型材料, 2020, 48 (12): 1- 4.
	Tao Y, Ke Y, Li J B, et al. Development status and prospect of biodegradable plastics industry in China. New Chemical Materials, 2020, 48 (12): 1- 4.
	王　戈, 邓健超, 陈复明, 等. 竹缠绕复合压力管的研究与开发. 林业科学, 2016, 52 (4): 127- 132.
	Wang G, Deng J C, Chen F M, et al. Exploitation and application of bamboo fiber-reinforced filament-wound pressure pipe. Scientia Silvae Sinicae, 2016, 52 (4): 127- 132.
	王献轲, 方长华, 刘　嵘, 等. 竹材不同尺度单元纵向拉伸性能研究进展. 竹子学报, 2020, 39 (4): 14- 24.
	Wang X K, Fang C H, Liu R, et al. The longitudinal tensile properties of bamboo units with different scales. Journal of Bamboo Research, 2020, 39 (4): 14- 24.
	王　月, 赵秦峰, 张占全, 等. 碳中和背景下国内外废塑料裂解法回收进展. 化工进展, 2022, 41 (3): 1470- 1478.
	Wang Y, Zhao Q F, Zhang Z Q, et al. Plastic waste recycling by pyrolysis at home and abroad under the background of carbon neutrality. Chemical Industry and Engineering Progress, 2022, 41 (3): 1470- 1478.
	韦丽明. 全球落实2030可持续发展议程举措及塑料薄膜/片及未来包装产业可持续发展的趋势研究. 塑料包装, 2022, 32 (3): 1- 10.
	Wei L M. Research on measures for the implementation of 2030 agenda for sustainable development in global countries and sustainable development trend of plastic film and packaging industry. Plastics Packaging, 2022, 32 (3): 1- 10.
	吴　波. “限塑”政策下塑料产业可持续发展方向. 世界环境, 2022, (4): 62- 65.
	Wu B. The sustainable development direction of the plastics industry under the "plastics limit" policy. World Environment, 2022, (4): 62- 65.
	杨文忠, 尹晓爽, 陈　云, 等. 我国工业冷却水处理技术发展回顾与展望. 工业水处理, 2021, 41 (9): 1- 10.
	Yang W Z, Yin X S, Chen Y, et al. Review and prospect of the development of industrial cooling water treatment technology in China. Industrial Water Treatment, 2021, 41 (9): 1- 10.
	杨玉盛, 陈光水, 谢锦升, 等. 中国森林碳汇经营策略探讨. 森林与环境学报, 2015, 35 (4): 297- 303.
	Yang Y S, Chen G S, Xie J S, et al. Strategy for carbon management in China’s forests. Journal of Forest and Environment, 2015, 35 (4): 297- 303.
	叶　柃. 竹缠绕复合材料将成为人类社会生物经济发展时期的支柱产业. 世界竹藤通讯, 2022, 20 (5): 1- 9.
	Ye L. Bamboo winding composite material will become a pillar industry during the period of bio-economy development of human society. World Bamboo and Rattan, 2022, 20 (5): 1- 9.
	张小轲, 王　戈, 冯绪泉, 等. 竹键盘和竹鼠标的开发与应用市场分析. 林产工业, 2012, 39 (6): 31- 34.
	Zhang X K, Wang G, Feng X Q, et al. The exploitation of bamboo keyboard and mouse and their application market analysis. China Forest Products Industry, 2012, 39 (6): 31- 34.
	周国模, 姜培坤. 毛竹林的碳密度和碳贮量及其空间分布. 林业科学, 2004, 40 (6): 20- 24.
	Zhou G M, Jiang P K. Density, storage and spatial distribution of carbon in Phyllostachy pubescens forest. Scientia Silvae Sinicae, 2004, 40 (6): 20- 24.
	朱春良. 2012. 竹纤维的性能、制取方法及在产业上的应用探讨. 中国科技信息, (16): 124, 128.
	Zhu C L. 2012. Bamboo fiber properties, preparation method and the application in industry. China Science and Technology Information, (16): 124-124, 128. ［in Chinese］
	Alsabri A, Al-Ghamdi S G. Carbon footprint and embodied energy of PVC, PE, and PP piping: perspective on environmental performance. Energy Reports, 2020, 6, 364- 370.
	Chen X, Chen F, Yang Q, et al. An environmental food packaging material part I: a case study of life-cycle assessment (LCA) for bamboo fiber environmental tableware. Industrial Crops and Products, 2023, 194, 116279. doi: 10.1016/j.indcrop.2023.116279
	Geyer R, Jambeck J R, Law K L. Production, use, and fate of all plastics ever made. Science Advances, 2017, 3 (7): e1700782. doi: 10.1126/sciadv.1700782
	Kuehl Y, Li Y, Henley G. 2013. Impacts of selective harvest on the carbon sequestration potential in Moso bamboo (Phyllostachys pubescens) plantations. Forests, Trees and Livelihoods, 22(1): 1-18.
	Li Z H, Chen C J, Xie H, et al. Sustainable high-strength macrofibres extracted from natural bamboo. Nature Sustainability, 2021, 5 (3): 235- 244. doi: 10.1038/s41893-021-00831-2
	Ma X, Cai L, Chen L, et al. Bamboo grid versus polyvinyl chloride as packing material in cooling tower: energy efficiency and environmental impact assessment. Journal of Environmental Management, 2021, 286, 112190. doi: 10.1016/j.jenvman.2021.112190
	van der Lugt P, Vogtländer J G, van der Vegte J H, et al. 2015. Environmental assessment of industrial bamboo products: life cycle assessment and carbon sequestration. 10th World Bamboo Congress. World Bamboo Organization, 1-16.

项目Item	全国竹藤标准化技术委员会 National Technical Committee for Bamboo and Rattan Standardization		国际标准化组织 International Organization for Standardization
项目Item	SAC/TC263		ISO/TC296		ISO/TC165
状态 Status	颁布 Issued	在研 Under research	颁布 Issued	在研 Under research	颁布 Issued	在研 Under research
国家/国际标准 National/international standards/items	27	9	9	3	4	3
林业行业标准 Forestry industry standards /items	76	41	—	—	—	—
总计Total/items	103	50	9	3	4	3

[1]	Youjing Zhang,Yueyang Li,Han Zhao,Yuwan Cheng,Wei Wang,Zaimin Jiang,Jing Cai. Relationship between Hydraulic Efficiency and Gas Exchange and Growth of Six Poplar Clones [J]. Scientia Silvae Sinicae, 2022, 58(11): 118-126.
[2]	Hongyu Huang,Yubo Luo,Liyu Tang,Xiaoxiao Li,Wei Peng,Chongcheng Chen. Registration of Point Cloud from Different Platforms in Forested Area Based on Tree Position Features [J]. Scientia Silvae Sinicae, 2022, 58(11): 96-107.
[3]	Rundong Li,Wendong Tian,Haiqun Yu,Xinhao Li,Chuan Jin,Peng Liu,Tianshan Zha,Yun Tian. Forest Phenology Estimation and Its Relationships with Corresponding Meteorological Factors Based on Digital Images in Songshan, Beijing, China [J]. Scientia Silvae Sinicae, 2022, 58(1): 89-97.
[4]	Bin Zeng,Jun Shen,Qifan Wang,Huajun Dong. Analysis of Odorants in Cinnamomum burmannii Wood with Different Moisture Contents [J]. Scientia Silvae Sinicae, 2021, 57(4): 133-141.
[5]	Xuezheng Zong,Xiaorui Tian. Impacts of Fuel Treatment on Potential Fire Behavior of Main Forest Types in Daxing'anling [J]. Scientia Silvae Sinicae, 2021, 57(2): 139-149.
[6]	Ruizhi An,Peng Zhang,Zhen Da,Nanqian Qiao,Qiuyue Tang,Sang Ba. Niche and Interspecific Association of Dominant Protozoan Species Under Different Hydrologic Periods in the Mitika Wetland of Tibet, China [J]. Scientia Silvae Sinicae, 2021, 57(2): 126-138.
[7]	Jiangxia Ye,Jingwen Wang,Mingsha Zhang,Ruliang Zhou,Lei Shi. Risk Pattern Analysis of Hyphantria cunea Based on Spatial Matrix Model and 0-1 Measure [J]. Scientia Silvae Sinicae, 2021, 57(1): 140-152.
[8]	Mingsheng Sun,Ying Hu,Xuan Chen,Qunfeng Luo,Zhangqi Yang. Effects of Exogenous Regulating Substances on Physiological Characteristics of Erythrophleum fordii Seedlings under Drought Stress [J]. Scientia Silvae Sinicae, 2020, 56(10): 165-172.
[9]	Tienan Liu,Lihai Wang,Guanghui Zhang,Qingkai Meng. Optimization Design of Key Parameters of a Triangular Pedrail Wheel System for Log Skidders [J]. Scientia Silvae Sinicae, 2020, 56(6): 94-102.
[10]	Changlin Liu,Guoying Zhou,Bai Xiao,Jun Liu. Diversity of Endophytic Fungi in Heartwood and Sapwood of Dalbergia odorifera [J]. Scientia Silvae Sinicae, 2020, 56(4): 109-120.
[11]	Huanqi Zheng,Ke Zhu,Yucheng Zhou. Method of Gradual Objective Tracking Control for Anti-Condensation in Full-Scale Chamber [J]. Scientia Silvae Sinicae, 2020, 56(1): 162-171.
[12]	Gao Min, Ma Xiangli, Yang Jinyu, Huang Xuanrui, Wu Yanan. Influence of the Mixed Modes of Larch and Birch on Soil Faunal Community in Mountain Area of Northern Hebei, China [J]. Scientia Silvae Sinicae, 2017, 53(1): 70-81.

The Current Status and Market Development Potential of Processing Technology and Products Using Bamboo as a Substitute for Plastic

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 10

References 0

Related Articles 12

Recommended Articles

Metrics

Comments