室外地板用竹基纤维复合材料制备技术

doi:10.11707/j.1001-7488.20140120

Scientia Silvae Sinicae ›› 2014, Vol. 50 ›› Issue (1): 133-139.doi: 10.11707/j.1001-7488.20140120

Previous Articles Next Articles

Manufacturing Technology of Bamboo-Based Fiber Composites Used as Outdoor Flooring

Yu Yanglun¹, Qin Li², Yu Wenji¹

1. Research Institute of Wood Industry, CAF Beijing 100091;
2. Planning and Design Institute of Forest Products Industry, State Forestry Administration Beijing 100010

Received:2013-01-07 Revised:2013-04-01 Online:2014-01-25 Published:2014-01-25
Contact: 于文吉

Abstract

Abstract:

The untreated and thermo-treated Phyllostachys edulis and Bambusa emeiensis bamboo fibrous veneer, which made with the dotted and/or linear shaped fiber separation technology on the semicircular bamboo tube, were reconstructed to form bamboo-based fiber composites with phenolic-formaldehyde adhesive. The physical and decay resistance properties were evaluated, and compared with the traditional bamboo bundle scrimber. The results showed that: Bamboo-based fiber composites showed superior performance than that of bamboo bundle scrimber.Bamboo-based fiber composites made from Bambusa emeiensis had better performances than that made from Phyllostachys edulis. Thermo-treatment would improve the properties of thickness swell, mould proof and so on, but decrease the horizontal shear strength. The bamboo fibrous veneer composed of interlaced fiber bundle was manufactured directly from semicircular bamboo tube without special removing the outer and inner layer of bamboo. The process was easier and the production efficiency was higher compared with traditional bamboo bundle.

Key words: bamboo fibrous veneer, bamboo-based fiber composites, outdoor flooring

CLC Number:

TQ321.5

Yu Yanglun, Qin Li, Yu Wenji. Manufacturing Technology of Bamboo-Based Fiber Composites Used as Outdoor Flooring[J]. Scientia Silvae Sinicae, 2014, 50(1): 133-139.

References

邓金龙, 张建辉, 李好. 2010. 我国竹地板产业市场现状与发展前景. 林业机械与木工设备, 38(7): 4-6.
(Deng J L, Zhang J H, Li H. 2010. Current situation and development prospect of banboo flooring industry in China. Forestry Machinery & Woodworking Equipment, 38(7): 4-6. [in Chinese] )
齐爱华, 韦亚红. 2009. 浅析我国竹地板的发展现状与前景. 林业机械与木工设备, 37(4): 4-6.
(Qi A H, Wei Y H. 2009. Development status and prospect of bamboo flooring in China. Forestry Machinery & Woodworking Equipment, 37(4): 4-6. [in Chinese] )
于文吉, 余养伦. 2013. 我国木竹重组材发展前景与展. 木材工业, 27(1): 6-8.
(Yu W J, Yu Y L. 2013. Development and prospect of wood and bamboo scrimber industry in China. China Wood Industry, 27(1): 6-8. [in Chinese] )
于文吉. 2011. 我国高性能竹基纤维复合材料的研发进展. 木材工业, 25(1): 6-8, 29.
(Yu W J.2011. Development of bamboo-fiber based composites. China Wood Industry, 25(1): 6-8. [in Chinese] ) 29.
于文吉. 2012. 我国重组竹产业发展现状与趋势分析. 木材工业, 26(1): 11-14.
(Yu W J, 2012. Current status and future development of bamboo scrimber industry in China. China Wood Industry, 26(1): 11-14. [in Chinese] )
Abdullah C K, Jawaid M, Khalil H P S A, et al. 2012. Oil palm trunk polymer composite: morphology, water absorption and thickness.Bioresources, 7(3): 2948-2959.
Bror S, Olov K, Ulla W. 2006. Determiantion of formic-acid and acetic acid concentrations formed during hydrothermal treatment of birch wood and its relation to colour, strength and hardness. Wood Sci Technol, 40(7): 549-561. Gusse A, Miller P, Volk A. 2006. White-rot fungi demonstrate first biodegradation of phenolic resin. Environ Sci Technol, 40(13): 4196-4199.
Jiang Z H. 2007. Bamboo and rattan in the world. Beijing: China Forestry Publishing House, 116-175.
Kajita H, Imamura Y. 1991. Improvement of physical and biological properties of particleboards by impregnation with phenolic resin. Wood Sci Technol, 26(1): 63-70.
Lee A W C, Liu Y. 2003. Selected physical properties of commercial bamboo flooring. Forest Prod J, 53(6): 23-26.
Loh Y F, Paridah M T, Hoong Y B, et al. 2011. Effects of treatment with low molecular weight phenol formaldehyde resin on the surface characteristics of oil palm stem veneer. Materials & Design, 32(4): 2277-2283.
Mallari V C Jr, Fukuda K, Morohoshi N, et al. 1990. Biodegradation of particleboard Ⅱ: decay resistance of chemically modified particleboard. Mokuzai Gakkaishi, 36(2): 139-146.
Okubo K, Fujii T, Yamamoto Y. 2004. Development of bamboo-based polymer composites and their mechanical properties. Composites Part A: Applied Science and Manufacturing, 35(3): 377-383.
Weiland J J, Guyonnet R. 2003. Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz als Rohund Werkstoff, 61(3): 216-220.
Yu Y L, Zhang Y M, Yu W J, et al. 2012. Comparison of the suitability of ci bamboo and moso bamboo for manufacturing bamboo-based fiber compostites. 2012 International Conference on Biobased Material Science and Engineering, 69-73.

[1]	Zhang Yamei;Yu Wenji. Effect of Thermal Treatment on the Properties of Bamboo-Based Fiber Composites [J]. , 2013, 49(5): 160-168.
[2]	Yu Yanglun;Meng Fandan;Yu Wenji. Manufacturing Technology of Bamboo-Fiber Based Composites Used as Container Flooring [J]. Scientia Silvae Sinicae, 2013, 49(3): 116-121.

Manufacturing Technology of Bamboo-Based Fiber Composites Used as Outdoor Flooring

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 2

Recommended Articles

Metrics

Comments