木制门套线横截面曲线的数学模型与仿真

doi:10.11707/j.1001-7488.20131120

Scientia Silvae Sinicae ›› 2013, Vol. 49 ›› Issue (11): 141-145.doi: 10.11707/j.1001-7488.20131120

Previous Articles Next Articles

Mathematical Model and Simulation of Cross Section Curve for Wooden Door Casing

Qi Yingjie¹, Ma Xiaojun^1,2, Hu Wanming¹

1. Northeast Forestry University Harbin 150040;
2. Jiamusi University Jiamusi 154007

Received:2013-10-11 Revised:2013-10-28 Online:2013-11-25 Published:2013-11-26

Abstract

Abstract:

Wooden door casing is a kind of typical wooden work-pieces with complex-shape curve. In order to solve the problem of machining complex-shape curve by profiling,the mathematical model of cross section curve of the wooden door casing with L-shaped clamping strip was established. The simulation program was writing by using VC++6.0,which could prove the accuracy,versatility and practicability of the mathematical model,which laid the theoretical basis for NC machining of door casing.

Key words: wooden door, door casing, cross section curve, numerical control, mathematical descriptions, analogue simulation

CLC Number:

TS652
S777

Qi Yingjie, Ma Xiaojun, Hu Wanming. Mathematical Model and Simulation of Cross Section Curve for Wooden Door Casing[J]. Scientia Silvae Sinicae, 2013, 49(11): 141-145.

References

胡海峰,董利红. 2008.规则空间曲面的加工.现代制造, (2/3):114-115.
吕斌,付跃进,张玉萍. 2008.我国木质门行业的发展现状与趋势. 木材工业,22(5):17-20.
马晓君,马岩. 2011a.门五金件孔槽数控加工的工业化前景与效益预测. 林产工业,38(2):13-16.
马晓君,马岩. 2011b.木制门五金件孔槽的数学模型与仿真. 中南林业科技大学学报,31(10):138-144.
马晓君.2012.门五金件安装孔槽数控加工关键技术的研究.哈尔滨:东北林业大学博士学位论文.
马岩.2006a.中国木材工业数控化的普及. 木材工业,20(2):56-58.
马岩.2006b.原木形状分段描述方法的数学描述理论研究. 生物数学学报,21 (3): 435-440.
马岩. 2008.板皮形状与尺寸的数学理论描述. 生物数学学报,23(2):301-305.
马岩. 2010.板皮形状的计算机仿真与参数驱动理论.计算机应用研究,37(5):45-48.
孟令联,张兆好,徐杨.2009.现代木门生产工艺与设备. 北京:中国林业出版社.
齐英杰,杨春梅,马岩.2006.马尾松细胞外廓结构简化模型的建立与仿真. 林业科学,42 (9): 93-95.
齐英杰,夏广岚,马岩.2010.木制楼梯扶手弯头端截面曲线的数学模型与仿真.林业科学, 49(9):116-119.
齐英杰,马岩.2008.原木裁板皮过程的建模理论与仿真方法.林业科学,44(12):112-115.
王文波. 2006.数学建模及其基础知识详解. 武汉: 武汉大学出版社,28-62.
吴智慧. 2004.现代木材加工技术第三讲:现代木家具的型面与曲面铣削工艺. 家具,(3):20-25.
徐杨. 2009.现代实木门的装配工艺及设备. 木工机床,(4):27-29.
徐达丽,马岩,郭继峰. 2004.直榫榫眼形状的数学描述.东北林业大学学报,32(6):120-121.
张云秀,马岩,齐英杰. 2004.以数学方法对榫眼形状进行描述. 林业机械与木工设备,32(9):14-16.
朱晓春.2009.数控技术.2版.北京:机械工业出版社,17.
Vinokuro V A,Sadovnichy V A. 2010.Mathematical description of artificial sense of touch systems. Journal of Mathematical Sciences,169(4):413-429.

[1]	Li Bo, Zhang Zhankuan. Theoretical Analysis on the Film Thickness of Wooden Door after Rotary Cup Type Electrostatic Spraying [J]. Scientia Silvae Sinicae, 2018, 54(5): 109-115.
[2]	Ma Xiaojun, Qi Yingjie, Hu Wanming. Heat Error Modeling Methods of NC Machine Tool Machining Holes or Slots of Wooden Door Based on the BP Neural Network Algorithms [J]. Scientia Silvae Sinicae, 2013, 49(12): 121-125.
[3]	Qi Yingjie;Xia Guanglan;Ma Yan. Curve Mathematical Model and Simulation of Wooden Staircase Handrail Elbow End Section [J]. Scientia Silvae Sinicae, 2009, 12(9): 116-119.
[4]	Qi Yingjie;Ma Yan. Modeling Theory and Simulation Method of Logs being Cut Out Board Paper Process [J]. Scientia Silvae Sinicae, 2008, 44(12): 112-115.

Mathematical Model and Simulation of Cross Section Curve for Wooden Door Casing

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 4

Recommended Articles

Metrics

Comments