Chen S T.2014.Experimental and simulative investigation of the electronic radiant floor heating system with phase change materials.Guangzhou:PhD thesis of South China University of Technology.[in Chinese] Cheng R X. 2007. Development trend of surface layer of 3-layer solid wood composite parquet. China Wood-Based Panels,(12):5-7.[in Chinese] Gao W, Wu G M, Fu Z,et al. 2001. Characteristics of three-layer fished parguet floor and the key manufacture. Forestry Science & Technology,26(3):40-42.[in Chinese] Kim S, Kim H J. 2005.Comparison of formaldehyde emission from building finishing materials at various temperatures in under heating system. Indoor Air, 15(5):317-325. Li G J, Zhu N, Feng G H, et al. 2007. Experiment on the phase-change heat-storage electric heating floor system.Acta Energiae Solaris Sinica,(9):1034-1038.[in Chinese] Li T X, Liu Y H. 2004. Numerical simulation on effects of flooring material and insulation on heat loss of radiant floor. Heating Ventilating & Air Conditioning,34(11):19-23.[in Chinese] Li Y A, Shang F W, Jiao M X. 2002. System design for low temperature hot water floor radiant heating. Building Energy & Environment,(1):62-65.[in Chinese]. Liang Y S. 2010. The characteristics of indoor geothermal heating in residential buildings and the elusion in its application. Technology Trend,(23):118.[in Chinese] Lu Z G, Meng X B, Huang H L, et al. 2005. Improved process method and warp degree of parquet. Wood Processing Machinery,(4):15-17.[in Chinese] Meng L P, Wang C M, Liu Y N, et al. 2011. Production technology and key points of three-layer parquet. China Wood-Based Panels,(11):16-19,23.[in Chinese] Seo J, Jeon J, Lee J H, et al. 2011. Thermal performance analysis according to wood flooring structure for energy conservation in radiant floor heating systems. Energy and Buildings,43(8):2039-2042. Si H. 2004. Guidance and proper use of geothermal floor. China Concrete,(5):62.[in Chinese] Tong X G. 2005. Selection of geothermal floor. China Concrete,(11):2.[in Chinese] Wang C G, Cai J B. 2014. Production technology of wood flooring. Beijing:China Forestry Publishing House.[in Chinese] Wang M K. 1983. Thermal transmissivity of wood. Journal of Nanjing Technological College of Foresty Products,26(3):150-157.[in Chinese] Wang Y W, Wu Q Z, Sun W S, et al. 2016. Research progress and prospect of carbon fiber electricity-heating floor. China Wood-Based Panels,(1):5-8.[in Chinese] Xue W H, Zhang X. 2000. Experimental study of thermal environment parameters and fuzzy analysis of thermal comfort in the heated room. Building Energy & Environment,(2):1-4.[in Chinese] Yang S M, Tao W Q. 2007. Heat transfer. Beijing:Higher Education Press.[in Chinese] Yu Z T, Xu X, Fan L W, et al.2011. Experimental Measurements of thermal conductivity of wood species in china:effects of density, temperature, and moisture content. Forest Products Journal,61(2):130-135. Yuan Q P, Liang S Q, Zeng Y, et al. 2015. Discussion on technology status of electric heating wood and bamboo floor with built-in electrothermal layer. China Forest Products Industry,(8):6-9,17.[in Chinese] |