东北林区汽车到材贮木场造材台的适宜宽度

›› 1985, Vol. 21 ›› Issue (3): 274-280.

东北林区汽车到材贮木场造材台的适宜宽度

车成森

东北林学院

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:1985-08-25 发布日期:1985-08-25

AN APPROPRIATE WIDTH OF CROSS CUTTING DECK

Che Chengsen

North-Eastern College of Forestry

Received:1900-01-01 Revised:1900-01-01 Online:1985-08-25 Published:1985-08-25

摘要/Abstract

摘要： 本文根据东北林区手提式电动链锯造材的工艺要求,提出了造材台宽度的计算方法,并根据翠峦、大丰、方正、东京城、白河、湾沟等22个林业局的“原条运材野帐”随机抽样结果进行了计算。作者认为,东北林区解放CA-10B和东风EQ-140两种车型原条到材的贮木场,造材台的适宜宽度为10—11m;搭脱拉T-148、斯康尼亚LT-110(15t拖车)和斯康尼亚T112H(15t拖车)4种车型的原条到材贮木场,造材台的适宜宽度为14—15m。

Abstract: This paper gives a method for calculating the width of cross cutting desk based on the technological requirement for cross cutting with portable electric chain saws in the Northeast Forest District,and a calculation is made on the basis of random sampling results of the"field accounts of tree-length transportation" taken from 22 forest bureaus including Cuiluan,Dafeng,Fangzheng,Dongjingcheng,Baihe and Wangou. According to the author,the appropriate width of the cross cutting desk is 10—11 meters for CA-10B Jiefang trucks and EQ-140 Dongfeng trucks;for T-138 Tatra trucks,T-148 Tatra trucks,LT-110 Scania trucks and T112H Scania trucks,the appropriate width is 14—15 meters.

车成森. 东北林区汽车到材贮木场造材台的适宜宽度[J]. , 1985, 21(3): 274-280.

Che Chengsen. AN APPROPRIATE WIDTH OF CROSS CUTTING DECK[J]. , 1985, 21(3): 274-280.