Quantitative Evaluation Method for the Appearance Quality of Sawn Timber Based on Main Surface Defects
Yang Jianhua1,2, Yan Lei1, Yu Hang2, Xian Jiang1, Wu Jian1
1. Beijing Forestry University Beijing 100083; 2. Beijing Forestry Machinery Research Institute of the National Forestry and Grassland Administration Beijing 100029
Yang Jianhua, Yan Lei, Yu Hang, Xian Jiang, Wu Jian. Quantitative Evaluation Method for the Appearance Quality of Sawn Timber Based on Main Surface Defects[J]. Scientia Silvae Sinicae, 2019, 55(8): 128-135.
陈立君. 2015. 基于流形支持向量机的木材表面缺陷识别方法的研究. 哈尔滨:东北林业大学博士学位论文. (Chen L J. 2015. The research for recognition method of wood surface defect based on SVM combined manifold. Harbin:PhD thesis of Northeast Forestry University.[in Chinese]) 郎跃胜. 2015. 浅谈营林生产中面临的问题及建议. 农村实用科技信息,(7):28. (Lang Y S. 2015. Talking about the problems and suggestions in the production of forest. Rural Practical Science and Technology Information,(7):28.[in Chinese]) 刘鑫华. 2014. 含有缺陷的脉冲涡流检测系统的数值建模方法研究. 成都:电子科技大学硕士学位论文. (Liu X H. 2014. Research on numerical modeling of pulsed eddy current detection system containing defect. Chengdu:MS thesis of University of Electronic Science and Technology of China.[in Chinese]) 马娟娟. 2011. 木质板材表面缺陷检测技术研究. 太原:中北大学硕士学位论文. (Ma J J. 2011. Research on detection technology for surface defects of wooden boards. Taiyuan:MS thesis of North University of China.[in Chinese]) 牟洪波, 王世伟, 戚大伟, 等. 2017. 基于灰度共生矩阵和模糊BP神经网络的木材缺陷识别. 森林工程, 33(4):40-43,54. (Mu H B, Wang S W, Qi D W, et al. 2017. Wood defects recognition based on gray-level co-occurrence matrix and fuzzy BP neural network. Forest Engineering, 33(4):40-43,54.[in Chinese]) 司徒伟明, 邹湘军, 王成琳,等. 2017. 基于OpenCV的木材表面缺陷检测系统. 现代电子技术,40(12):148-151. (Situ W M, Zou X J, Wang C L, et al. 2017. Wood surface defect detection system based on OpenCV. Modern Electronics Technique, 40(12):148-151.[in Chinese]) 宋小燕. 2015. 木材表面灰度缺陷识别中图像分析方法研究. 呼和浩特:内蒙古工业大学硕士学位论文. (Song X Y. 2015. Research on image analysis method of wood surface gray defects recognition. Huhhot:MS thesis of Inner Mongolia University of Technology.[in Chinese]) 王炳乂. 2009. 面阵CCD图像采集与多接口传输系统. 成都:电子科技大学硕士学位论文. (Wang B Y. 2009. Area CCD image acquisition and multi-interface transmission system. Chengdu:MS thesis of University of Electronic Science and Technology of China.[in Chinese]) 谢永华. 2013. 数字图像处理技术在木材表面缺陷检测中的应用研究. 哈尔滨:东北林业大学博士学位论文. (Xie Y H. 2013. The application and research of digital image processing on wood surface texture inspection. Harbin:PhD thesis of Northeast Forestry University.[in Chinese]) 尹建新. 2007. 基于计算机视觉木材表面缺陷检测方法研究. 杭州:浙江工业大学硕士学位论文. (Yin J X. 2007. Research on wood surface defect detection based on computer vision. Hangzhou:MS thesis of Zhejiang University of Technology.[in Chinese])